Search results

Search the forum Search Articles
  1. R

    Suppressors Should I put lube on suppressor adapter threads?

    Re: Should I put lube on suppressor adapter threads? Dissimilar metals? I would use anti-seize! Those 1/2 X 20 threads are easy to start wrong.
  2. R

    Suppressors first time out with eco9

    Re: first time out with eco9 Couldn't that cleaning tool also be used as a loading tool for grease? If the holes/Ports were spaced at the same distance as the baffles? With a grease Zerk on the knurled end, just a few pumps and you'd have your baffles loaded! -Rick
  3. R

    Suppressors Suppressor books?

    Re: Suppressor books? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RollingThunder51</div><div class="ubbcode-body">Rick, Within are some of the best...and worst...and everything else in between. You state that you are no longer residing in the U.S. If you...
  4. R

    Gunsmithing online gunsmithing school

    Re: online gunsmithing school I went to the Colorado school of trades(Gunsmithing) in Lakewood, CO and think that is the only way you can learn gunsmithing. I have five 2" binders full of notes!!! Stuff you won't learn from some online course. I apprenticed for three years at Wisner's Gun...
  5. R

    Suppressors Suppressor books?

    I have been looking through them online, the more professional(Not the PVC Crap) and was wonering if any of you have opinions on which is the best one? I am a Machinist by trade some making them isn't the problem. Thanks, Rick
  6. R

    Suppressors SBR if suppressor is Tig'd?

    Re: SBR if suppressor is Tig'd? So refresh my memory. What was the $5.00 stamp for?
  7. R

    Suppressors SBR if suppressor is Tig'd?

    Re: SBR if suppressor is Tig'd? Guys, Isn't an SBR a AOW(Any other Weapon)? And a $5 Stamp? Like a short barrel Shotgun I used to own when I lived in USofA. Had a 7" Serbu!
  8. R

    Gunsmithing Re-stocking a 40x

    Re: Re-stocking a 40x <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: boudin</div><div class="ubbcode-body">
  9. R

    Vortex SPARC

    Re: Vortex SPARC <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ggmanning</div><div class="ubbcode-body">I have one on on Ruger 22 pistol. I beat it to death and it has held up well. Magnifier is junk as stated. It is the best little NV compatible dot on a 22...
  10. R

    Gunsmithing Re-stocking a 40x

    Re: Re-stocking a 40x Yup, Two action screws. If you can get two screw, same thread pitch, but longer then your action screws. Screw them all the way in then give them a wrap with a good size dead blow hammer. I did that for a customer once. It will not hurt the barreled action doing this...
  11. R

    Gunsmithing free float on an ADL

    Re: free float on an ADL Every gun is different. If it is a hunting rifle and you only take one shot and it shoots to the same place every time from a cold bore, don't mess with it!
  12. R

    Gunsmithing Recommend a good gunsmith?

    Re: Recommend a good gunsmith? Wisner's up in Chehalis, WA is really good!
  13. R

    Suppressors Recoil with brake vs can+brake?

    Re: Recoil with brake vs can+brake? Just an idea, but what if you had a Sionics type suppressor that has a huge expansion chamber where the muzzle brake is. Wouldn't that allow the muzzle brake to do its job and the suppressor to do its job also? Just thinking out loud.
  14. R

    Suppressors Exit hole on .22 can?

    Re: Exit hole on .22 can? It is a .22 CO2 air rifle, so no restrictions where I live. I will make a new end cap to quite it down. The pellets ar only travelling 1000fps. Thanks Guys!
  15. R

    Suppressors Exit hole on .22 can?

    Hey Guys, What is the smallest hole you can safely use for a .22 can? I had experimented with .261 but think I could go smaller? thanks, Rick
Top Bottom
Back
Home
Forums
Merch
Alerts