• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. bob6117

    AR-15 sub sonic load help needed

    Thanks for all the reply's , my twist is a 1/8 and I use 77gr. smk over 23.7 of Varget for my standard load. The sub sonic load is hitting nose first at 50yd., but sideways @ 100yd. I dont have a specific need for a sub sonic round, I'm just messing around with some leftover Trailboss and...
  2. bob6117

    AR-15 sub sonic load help needed

    I am trying to devolop a sub sonic load for my AR. I shot 5 groups today @ 100yd., all grouped around 2" but hit the target completely sideways. There were no baffle strikes at all. My loads were: Lake City 5.56 brass 5.2- 6.0 grains of Trailboss in .2 grain increments Wolf .223 primers...
  3. bob6117

    Savage 110BA 338LM

    Hornady 285gr. bthp Hodgdon H1000 89.5gr. Lapua case Federal 215M 3.700 coal 2745 fps Hornady 250gr. bthp Hodgdon H1000 95.0gr. Federal 215M Lapua brass 3.550 coal 3025 fps
  4. bob6117

    Rifle Scopes 1-4x Scope for .223 Ar15

    I have used mine out to 650 on man sized steel, just hard to spot hits on a dirty target or misses @ 4x. Most of the time I have my other rifle with a 16x magnification scope to spot shot placement on steel. I need a good spotting scope. Bob
  5. bob6117

    Rifle Scopes 1-4x Scope for .223 Ar15

    I have a Vortex Viper PST 1-4 in a ADM Recon mount, really happy with the setup. The Viper is around 475.00. Bob
  6. bob6117

    Savage .338 LM

    Re: Savage .338 LM I have the 110 BA in .338, had some issues with accuracy until I removed the crush washer behind the brake. Also replaced the factory brake with a QD flash hider for my YHM .338 Phantom. The rifle went from 2.5" at 100 yd. to sub 1" at 200. Bob
  7. bob6117

    .338LM - .50 Cal

    Re: Loads for .338LM- .50 Cal Savage 110 BA Sierra 300 gr. Matchking Lapua brass 90.0 gr. Retumbo Fed. 215M primer C.O.A.L 3.700 Same rifle Hornady 285 gr. BTHP Lapua brass 89.5 gr. H-1000 Fed 215 primer C.O.A.L 3.700 2747 FPS av. for 20 shots
  8. bob6117

    Gunsmithing Factory Threaded Savage Barrel Question

    Re: Factory Threaded Savage Barrel Question I have the same problem with my 110 BA in .338 Lapua. Just got back from the range, first shot baffle strike on my YHM Phantom .338. I cant see any way to get the washer off except to cut it off. The washer does not clear the threads. Bob
  9. bob6117

    Subsonics - All Calibers

    Re: Loads fo Subsonics- All Cals Rem. 700 AAC 20" 1/10 TW. Hornady 150 gr. Interlock RN #3035 9.8 gr trailboss lapua brass CCI BR2 primers Hornady 220 gr. Interlock RN #3090 14.2 gr. Trailboss Lapua brass CCI BR2 primers Both loads grouping at 1" at 100yd. No chrono.
  10. bob6117

    Rifle Scopes Zeiss Conquest 6.5-20x50

    Re: Zeiss Conquest 6.5-20x50 I had a Zeiss Conquest 6.5-20. The glass was great and it tracked perfectly, but on my .308 I ran out of elevation adj. @ 900yd. That was with a 20 MOA base and 175 matchking at 2600fps.
  11. bob6117

    Suppressors Form 4 wait time

    Re: Form 4 wait time NFA Item: suppressor Form type: 4 transferee type: Individual Form sent: Feb. 15 Check cashed: Feb 22 Pending: Mar 8 Approved July 30 form received: Aug 7 Examiner: Dudash
  12. bob6117

    Suppressors Form 4 wait time

    Re: Form 4 wait time YHM .338 Phantom Form 4 Sent Feb.15 2012 Check cashed Feb.22 2012 Pending Mar.8 2012 Approved. Received. Examiner.
  13. bob6117

    Suppressors Thoughts on Phantom 762 qd brake

    Re: Thoughts on Phantom 762 qd brake I also have a 700 AAC/SD with a YHM .338 brake. I did have to adj. my handloads slightly after replacing the JP Enterprises brake with the YHM, but I did not lose any accuracy. I'm expecting to have to adj. the load again after my paperwork comes back and...
  14. bob6117

    110gr Vmax in 300wm advice

    Re: 110gr Vmax in 300wm advice <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skum</div><div class="ubbcode-body">if wrong section apologies... my buddy gave me 200 free 100gr vmax's and i have a 300wm on its way from surgeon 26' 1/10 twist i read threads from...
  15. bob6117

    Remington 700 SPS Tactical AAC-SD ???

    Re: Remington 700 SPS Tactical AAC-SD ??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: NU Shooter</div><div class="ubbcode-body">Would anybody like to share there load data? I have bought Varget powder and 168 Gr bergers for my AAC-SD gun. I will be loading...
  16. bob6117

    Range Report 190gr. SMK / Reloader 17

    I shot a couple of group's over the chronograph this morning at 100 yard's. Remington 700 AAC/SD 20" barrel 1/10 twist. Win. brass F/L sized Federal 210M primer's 190 SMK Reloader 17 Loaded at 2.945 COAL, .010 off lands 48.5gr 2552fps ES 48 fps SD 24 fps .556 CTC 49.0gr 2595 fps ES 24 SD 14...
  17. bob6117

    7 Rem Mag - 7 WSM - 7-08

    Re: Loads for 7 Rem Mag-7 WSM-7-08 Savage 10 7mm-08 9 1/2 twist Resized Lapua 308 brass Fed 210 pr. 44.5 gr. Varget Sierra 100 gr. HP 3120 fps av. 3/4 " or slightly better @100 yd.
  18. bob6117

    .223 - 5.56

    Re: Loads for .223- 5.56 Sierra 69 gr matchking LC 05 Brass Fed. 205 pr. 25.3 gr. Varget coal 2.250 2800 fps Rock river Varmint 20" 1/8 tw.
  19. bob6117

    Loads for 30-06

    Re: Loads for 30-06 59.5 gr. RE-15 Rem. brass Fed 210 Hornady 110 V-Max 3/4 moa 3670 fps 26.5" Rock Creek barrel 2.8 mil. drop @600yd. I'm looking forward to introducing one to a crow or groundhog soon. Will take pic's. Bob
  20. bob6117

    ACIS / Timney trigger

    Re: ACIS / Timney trigger Will do, I appreciate the feedback. Thanks Bob
Top Bottom
Back
Home
Forums
Merch
Alerts