• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. S

    loaders of belted magnum's... HELP

    i just ran into a similar problem with some once fired brass i purchased, it was fired from factory chambers and i now have a pretty tight match chamber.the die niles coyote linked solved the issue.as said above it squeezes the brass back to near new dimension just above the belt. MR. niles...
  2. S

    5R 300winmag

    in federal brass with 215m primer is 75 gr, any more then that they where getting on the hot side. my notes show that it was 23 min to 1k
  3. S

    5R 300winmag

    trg, it was printing in the .3, witch is about all i'm capable of. that was the stock barrel 1-11 twist.
  4. S

    Maggie’s You might be a gun nut if...

    when your going to a match and get pulled over and the cop ask's "do you have any firearm's" and your reply is "ya what do you need" .
  5. S

    5R 300winmag

  6. S

    Anyone got $17,000 for a Remington 700 M24E1 XM2010?

    spf. bahahahaha
  7. S

    Opening a small primer pocket to accept the large primer

  8. S

    26 nosler-correct case wrong bullet

    thanks for the input guys. so over all it's not a pipe dream(pun intended) and there could a future for it in a 7mm or .30, just have to a reamer and brass and will see what happens. for you guy's that have opened up necks, what are possible problems do you foresee this causing going up to a...
  9. S

    Rayner's First 2014 Long Range Match

    shovel me a place to shoot prone for the following weekend :)
  10. S

    26 nosler-correct case wrong bullet

    thanks for the print,my google-fu has been weak i couldn't find that sob anywhere.thanks i sure appears to be based off a RUM case, now all we need is some brass to start necking up!
  11. S

    Need a Jack Hammer

    you may want to rent a air compressor (185 cfm pull behind) and see if they have a clay spade for a hand chipper also. a electric hammer is going to be pretty heavy and generally don't work very well,the hammer stroke is shorter compared to a air hammer. or you could always go with a cordless...
  12. S

    26 nosler-correct case wrong bullet

    until we can see a actual full reamer print( hint hint :) ) we don't know for sure,but it is shorter then a 7mm rum. i hope it is based on the rum, more case capacity.
  13. S

    New 2014 Thunder Valley Precision memberships

    is there still the normal 50$ option?
  14. S

    26 nosler-correct case wrong bullet

    very nice, that is what i have in mind and i like what you did with the shoulder.do you have the reamer specs? would like to see them if possible, thanks
  15. S

    TRG Rifles picture thread.....??

    hmm not sure on the new style trigger,i don't think there is a sear adjustment on the old ones i'd have to check when i get it back. if memory serves me it's just spring preload for weight. if i'm incorrect fell free to correct me anybody.
  16. S

    26 nosler-correct case wrong bullet

    yes the 30/375 is pretty close to what i want but the neck is a little short, or no? and is it a .532 case head? what kind of speed you getting with the heavies? also not knowing all the 26 nosler case dimensions the 30-375 may actually be a better choice, but if its based off the RUM cartridge...
  17. S

    26 nosler-correct case wrong bullet

    can't sat that i have ,what am i missing?
  18. S

    26 nosler-correct case wrong bullet

    thinking out loud here,it has the same case head dimensions as a belted mag,very similar length also. i'm think necking it up to 7mm and 308 would be a winner. my thoughts why 1- no belt 2-more case capacity then the win mag 3-will fit a standard magnum action and bolt face 4-would probably...
  19. S

    leupold VX II turrets

    i have done it on a vxiii and it works well,i only did the elevation knob. the turret knob i used was a after market one NOT the stoney point. the one i used was from a company called- kenton industries- it was pretty pricey,partially my fault for not understanding there pricing. the turret is...
  20. S

    .20-.22LR Super Stinger

    good job! tag for performance. on a side note if one of these rounds makes it in to a 10/22 you may have a bolt speed issue? there was something of the sort when doing a 17mach2 in a 10/22, i vaguely remember a heavier bolt handle. keep up the good work!
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts