Search results

Search the forum Search Articles
  1. K

    Suppressors Looking at NFA trusts - SilencerShop or SilencerCentral?

    Thanks! I just looked into them, and I'm leaning towards guntrustguru now.
  2. K

    Suppressors Looking at NFA trusts - SilencerShop or SilencerCentral?

    I'd like to set up an NFA trust, I've been leaning towards building a SBR for years and decided to go ahead and get a trust set up so I can then file a Form1 (I'd prefer to do this as a trust instead of as an individual). Been leaning towards the SilencerShop Unlimited trust, but realize that...
  3. K

    Stupid Fudd range rules?

    A range local to me only allows paper Bullseye targets.
  4. K

    SOLD SPF Athlon Cronus BTR Gen 2 APRS1

    Yes.
  5. K

    Bolt effect on accuracy?

    Thanks. This rail doesn't have the picatinny on top, so it sits slightly below the top of the upper receiver, so no contact between the rail and the scope mount. Will clean off the paint on the upper receiver rail and see if that changes anything.
  6. K

    Bolt effect on accuracy?

    It's an ALG V1 rail. there's plenty of clearance around the gas block. Can try to measure later, but I've got several uppers with this same rail and haven't had any clearance issues. It's an A2 flash hider. No, I haven't shot it without it. SWFA 30mm scope mount. You might be onto...
  7. K

    Bolt effect on accuracy?

    I pulled the BCG again, took the bolt out, yes it's free floating on the gas tube. Funny that you mention lockback. I shoot this rifle from a bench, Atlas bipod in the front, sand bag in the rear, and as such, I have 2 20 round magazines I use with it. 1 locks back, the other does not. I...
  8. K

    Bolt effect on accuracy?

    I pulled the BCG today. No MPI markings or any markings at all. Appears to be a phosphate finish though. I've had this in a parts bin for probably 9 years. The gas key is staked on, good and tight Does the gas port look partially blocked by the gas block? Is the consensus that it's...
  9. K

    Bolt effect on accuracy?

    Does it look like the gas port is partially blocked by the gas block? That's my concern.
  10. K

    Bolt effect on accuracy?

    I will check the gas key tonight. I did stick a borescope down the bore and noticed this. Could this be my problem?
  11. K

    Gun safe space.

    I find that rifles with pistol grips, or optics take more room. Buy a safe that advertisers 3x what you think you need.
  12. K

    Bolt effect on accuracy?

    There was just the slightest amount of clearance when the barrel was in the upper, hence the compound. Muzzle device is tight. Scope and mount seem tight, as well, but plan on investigating further. Rifle has spray paint on the optic rail. Wondering if that may be an issue. I intend on...
  13. K

    Bolt effect on accuracy?

    Rock River Arms 2 stage trigger.
  14. K

    Bolt effect on accuracy?

    My particular barrel is 1 7" twist rate. It's a stainless barrel, no flutes. It has a Geissele gas block on it that was pinned on by a gunsmith (ADCO in Ohio). They also coated the exterior of the barrel with a black coating. The upper receiver is a blem BCM upper, with a thin coat of...
  15. K

    Bolt effect on accuracy?

    I've got an AR15 with a White Oak Armament 18" SPR barrel with a cheap no name BCG from AIM Surplus. I've tried several ladders with it, but haven't had luck getting any decent groups. I've done a Varget ladder with 69gr SMK bullets, and a AA2520 ladder with 77gr SMK bullets, and most groups...
  16. K

    Which peice of equipment shouldni replace

    AMP annealer
  17. K

    Tell me about Kentucky

    I'm in North Central KY. There is a 500 yard range close to Borden, Indiana, just across the river (Southern Indiana Rifle and Pistol Club). They run CMP / F-Class / Highpower matches there. Knob Creek is in Bullitt County. It goes to about 325 yards. Camp Atterbury is farther north. I...
  18. K

    .223 - 5.56

    I'm using 80gr ELDs with N140. 23.6gr of powder @ 2.390". I know a guy using 25gr of N140 with the 80gr ELD and LC brass.
  19. K

    Think I'm going to take the Vudoo plunge - what barrel profile?

    Yeah, if @RAVAGE88 says his goto is a 22" Kukri, I'm thinking the accuracy difference between the Kukri and MTU must be either negligible or non existent, and the difference is more balance related. I've got 2 centerfire rifles with profiles similar to the Kukri that shoot lights out, so I...
  20. K

    Think I'm going to take the Vudoo plunge - what barrel profile?

    Looking around on Vudoo's website some more I found that they still offer the 22" MTU. I'm thinking that's probably the way I'll go. They also offer it with the MDT ACC chassis, planning on buying it that way. I have the ACC on another gun and it's been great.
Top Bottom
Back
Home
Forums
Merch
Alerts