Search results

Search the forum Search Articles
  1. O

    700p 300 win mag

    Re: 700p 300 win mag For some resom my 700p wouldnt shoot the heavier bullets also. Loaded up some 168 SMK's and got some ragged 1 hole groups at 100 yrds with it. When i went to 200 yrds with ths 168"s I was able to keep it under 2 inches. I was even able to keep it under an inch with 143...
  2. O

    6.5 creedmoor

    I was womdering if someone was using something other than H-4350 for reloading. I'm out of that powder, but have a good supply of Varget,IMR-4064,and IMR-4350. My other powders are for my bigger guns,300 Win Mag and larger. I will be using a 140 BTHP. Thanks for any help.
  3. O

    Brass for AR-15...Win, Rem, or LC?

    Re: Brass for AR-15...Win, Rem, or LC? Ant of the 3 you mentioned is a good choice,I have and still use them in my gas guns. If doing some long range shooting go with Lapua brass. Thats ALL I use in my bolt guns. Here is my list of brass. Lapua Hornady Winchester Military This is only my...
  4. O

    help i need a custom head stamp

    Re: help i need a custom head stamp Try to get ahold Bertram brass, they make some obsolete brass. Other choice would be to give Buffalo Arms a try, they do alot of case forming to fit the old black powder ctg's. One of these 2 might be able to help.
  5. O

    .223 with H4895

    Re: .223 with H4895 Thats the same load I use in my DPMS 1-9 upper, 20" barrel.I also use that load with a Hornady 68 match.
  6. O

    6 MM Dasher Loads

    Re: 6 MM Dasher Loads You should be able to find out any info you want on 6mmbr.com. Do a serch or ask the same questions. Thers a good bet someone is shooting it over there. i got alot of info on my 6mmRem br. Good luck.
  7. O

    FN SPR - What works for you?

    Re: FN SPR - What works for you? Lapua brass 168 Nosler Custom Comp bullet 43.5 IMR-4064 OR 45.5 Varget CCI BR2 2.815 OAL
  8. O

    accrecy from a .308

    Re: accrecy from a .308 I get 1/2 MOA out of all 3 of my rifles,TRG,FN-SPR,and Kimber ATR. Iuse the same bullet, but use 43.5 IMR-4064.
  9. O

    rcbs gold medal dies or redding competiton dies

    Re: rcbs gold medal dies or redding competiton dies Go with the Redding My RCBS comp seater die kept putting a ring on the bullets while they were being seated. Switched to Reddding for all my comp rounds. I use the RCBS for my hunting and ball loads
  10. O

    338LM dies

    Re: 338LM dies I do all my ordering from Midway USA,Natches,Graf&SONS,and Midsouth. All companies have what your looking for.
  11. O

    Old Ammunition: Still Good to Shoot?

    Re: Old Ammunition: Still Good to Shoot? As long as the stuff was stored properly it will shoot fine. I've shoot plenty of WW2 ammo and some .45 ACP from WW1. It all went bang. Only stuff I had some hangfires with was some vintage .43 Spanish, even that stuff shot well.
  12. O

    FN SPR - What works for you?

    Re: FN SPR - What works for you? Mine likes, 168 Nosler Custom Comp Lapua brass 43.5 IMR-4064 OR 45.5 Varget CCI BR2 2.825 OAL
  13. O

    1500 yd 338 Lapua OEM rifle

    Re: 1500 yd 338 Lapua OEM rifle TRG-42 or AI-AW are your two best options. The rifles are pretty much the same as far as stock fit goes. It just dependes on how fat your wallet is. Base price is the big differance. TRG around less than 3 grand, AI-AW around twice that price.
  14. O

    Remington 700p barrel change

    Re: Remington 700p barrel change Concider youself luky to shoot.5MOA. Guns that cost 2-3x more only guarantee 1MOA. A custom barrel change will put you in the same area as far as group size goes. If you want smaller groups, take your time between shots and concentrate on trigger and sight...
  15. O

    Cleaning case question...

    Re: Cleaning case question... I absolutly clean my brass after each firing. There is alot of residue inside a case after its fired. The primer leaves some and so does the powder,and some rifles get residue on the outside of the necks. If you dont clean your brass you are going to scratch your...
  16. O

    6BR VS 30BR

    Re: 6BR VS 30BR Go to 6mmbr.com there are alot of guys using 6mm to wim ALOT of matches out to 600 yrds. I have a 6mm Rem BR built on a Rem 700. I found alot of info on that sight, now I can keep my groups in the .200 range at 100yrds when I do my part. The Rem BR isnt as accurate as the 6mm...
  17. O

    Your best .338LM loads.

    Re: Your best .338LM loads. I have 2 rifles in 338 Lapua, Sako TRG-42,and a Rem 700p MLR. I use the Remington when I go to my fathers in Idaho for hunting. I'll give you my loads for both guns, but remember each rifle is different. What works in mine might not work on yours. Remingtom...
  18. O

    Lee Classic Turret question

    Re: Lee Classic Turret question All you have to do is get the double disk kit and the aoto disk will work fine. Just pay attention to the powder hopper if you use stick powder likr IMR brand. That powder will wear away at the opening in the powder measure, it happened to me. Just buy an extrs...
  19. O

    Need advise please

    Re: Need advise please I have a 700P 26" barrel with 20x super sniper scope 1-9 barrel. My rifle DID NOT like the 69 SMK at all, went to a 53 Hornady and 52 Sierra. It was like I hit a sweat spot. Heres my load. Lapua brass 26.0 Varget CCI BR primer 2.270 OAL I neck size only!! When I do my...
  20. O

    Sierra vs Nosler... your thoughts

    Re: Sierra vs Nosler... your thoughts The Nosler is all I use for my 3 tactical rifles. TRG-22 FN-SPR and Kimber ATR. I find no difference between them and SMK. If going past 500 yrds, I would try somthing else like the Lapua 155'S, high BC and a great bullet
Top Bottom
Back
Home
Forums
Merch
Alerts