Search results

Search the forum Search Articles
  1. 3

    help me get my extreme spread down on my .308

    Re: help me get my extreme spread down on my .308 First off, have you changed any of your load components lately? If you have, then whatever you changed to is probably the culprit. If you've changed nothing, then I suggest running a few more strings of that same load over the chrony again...
  2. 3

    Any suppliers have .338 Lapua 300gr bullets

    Re: Any suppliers have .338 Lapua 300gr bullets I got a box of 500 from Midway about a week ago. My bad, I thought you were asking about the Sierra 300's
  3. 3

    338 Lapua Magnum and Reloader 25

    Re: 338 Lapua Magnum and Reloader 25 Thanks to all, very good info to get me started!
  4. 3

    Loads for 223 1 in 9 16 inch with 60gr VMAX

    Re: Loads for 223 1 in 9 16 inch with 60gr VMAX I've used these bullets in my Bushmaster with your same length and twist. The power charge was 26.0 grains of 748. This load was quite accurate out of my rig.
  5. 3

    Chargemaster 1500 out of stock EVERYWHERE????

    Re: Chargemaster 1500 out of stock EVERYWHERE???? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Weda'</div><div class="ubbcode-body">Midway just delivered mine yesterday </div></div> +1
  6. 3

    338 Lapua Magnum and Reloader 25

    Re: 338 Lapua Magnum and Reloader 25 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mark S</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redhook</div><div class="ubbcode-body">I got this email response...
  7. 3

    Does Federal .308 brass suck??

    Re: Does Federal .308 brass suck?? A few other factors that might be affecting your brass: Full length sizing Headspace issues Of course running hot loads If you full length size all the time, then case life decreases drastically. If you full length size to min spec and have a large...
  8. 3

    Does Federal .308 brass suck??

    Re: Does Federal .308 brass suck?? No problems here with FedGM brass. Are you running hot loads?
  9. 3

    What about WW-748 ?

    Re: What about WW-748 ? Always works for me, either 168 or 175.
  10. 3

    338 Lapua Magnum and Reloader 25

    Re: 338 Lapua Magnum and Reloader 25 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redhook</div><div class="ubbcode-body">I got this email response from Alliant: We have no data of our own for this cartridge so I will attach some loads from outside sources...
  11. 3

    338 Lapua Magnum and Reloader 25

    Could anyone using Reloader 25 in the 338 LM give me their starting loads and it's velocity? Thanks!!!!
  12. 3

    Help, 300 WM low recoil rounds

    Re: Help, 300 WM low recoil rounds For target practice with my hunting 300WM I use sierra 165 BTHP Gamekings over 76gr of Reloader 25. Recoil is comparable to a 308 Winchester. This helps me keep in practice with my hunting rifle while keeping my shoulder wear down to a minimum.
  13. 3

    Nosler Vs. Laupua Case life 308

    Re: Nosler Vs. Laupua Case life 308 I stopped counting after 30 firings with Lapua brass. Can't say about the Nosler stuff.................
  14. 3

    Gunsmithing Most effective muzzle brake ?

    Re: Most effective muzzle brake ? Vias and OPS Inc brakes work well for me. The Vias allows me to see hits on target in 308 Win.
  15. 3

    Shooting bullets backwards in subsonic ammo?

    Re: Shooting bullets backwards in subsonic ammo? Thanks for the replies everyone! Is there anyone out there that has done this with say 175gr or 190gr bullets?
  16. 3

    Shooting bullets backwards in subsonic ammo?

    Just wondering if anyone's heard of this?
Top Bottom
Back
Home
Forums
Merch
Alerts