Search results

Search the forum Search Articles
  1. dinc

    Ruger 10/22 threaded barrel end

    The ebay device says it's for 'fake suppressors' and that's what they mean. It's not accurate enough to mount a real suppressor, as previously mentioned, you would get baffle strikes with this slip-fit adapter. It's for 'visual effect' devices only: muzzle brakes, compensators and such. If you...
  2. dinc

    Leupold Mark 4 Spotting Scope Mil-dot Reticle?

    Tough spot. If you bought it with the implication that it was in good shape and would carry a Leupold warranty and then found out about the grittiness and the loose housing I would talk to the seller. That's 3 strikes against what you were sold. Leupold will return you a good scope if they work...
  3. dinc

    Leupold Mark 4 Spotting Scope Mil-dot Reticle?

    Lexington, What exactly is wrong with the scope? What were you having repaired? Or do you just want a different reticle?
  4. dinc

    Gunsmithing cant get the barrel off my 700

    It was kind of mentioned above but the first thing you need is an actual barrel vise. A bench vise with jaws is not going to cut it. A barrel vise would crush those jaws you're using. You need something that will hold a barrel tight enough that you can swing on the end of a 3 foot cheater bar...
  5. dinc

    Shooting events in Oregon?

    I think you're describing the Practical Rifle's Sniper match at Tri County Gun Club. Just had the February Sniper match. The next long range precision rifle type match will be in September. The other monthly Practical Rifle matches are more AR based shorter range action matches. Check their web...
  6. dinc

    Remington 700 Sendero Magazines

    Remington factory magazines clip in from the bottom in the middle. You can't feed past this mechanism so there are no magazines that are longer or hold more rounds. One option is to convert to an AICS magazine / Badger type DBM.
  7. dinc

    Need some info on a Remington 40-X

    Hard to tell from the pics, it looks like factory proof marks on the barrel. Is it a factory barrel? I could have been rebarreled, possibly with a different twist. You should check it. Put a tight patch on a rod and see how far it goes to rotate once. Then you'll know. Shoot it and have fun. It...
  8. dinc

    Which 700 Rem DBM has the closest footprint to a BDL?

    The Stiller is great as mentioned. However, if it's for an aluminum bedding block stock, i.e. B&C or HS, it's A LOT of dremmeling for the width. I did it. I don't recommend it. It takes a mill. Fiberglass or wood, no problem. Dremmel and a file. The Stiller is oversize below the stock line...
  9. dinc

    Gunsmithing Will tac30 go in a stock inletted for a rem 700 sa

    Re: Will tac30 go in a stock inletted for a rem 700 sa yes.
  10. dinc

    Rifle Scopes Service on SWFA 10x42HD

    Re: Service on SWFA 10x42HD The 10x42M are Bushnell. The HD are SWFA. SWFA took over the sales of the M from Bushnell and their HD line grew from there.
  11. dinc

    Gunsmithing Finding a gunsmith in utah

    Re: Finding a gunsmith in utah You could try George Liechty. Check this link first. http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3430187&page=1 I know. I'm going to hell.
  12. dinc

    Gunsmithing AICS AX Action Hex wrench

    Re: AICS AX Action Hex wrench I got a couple of long 3/16 allen wrenches, cut the short leg off, use it in a 3/16 socket on a torque wrench. Next garage sale find all get a 3/16 socket and epoxy one in. http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2419855
  13. dinc

    22-250 VTR!!!!!

    Re: 22-250 VTR!!!!! 1:14 twist: 55gr spritzer or 53gr boat-tail max. Plastic stock = usually a shotgun (and on some days for sure, they vary more than my wife's moods).
  14. dinc

    I have primers......how can i ship them

    Re: I have primers......how can i ship them Many are probably too young to remember when primers came in a little tray less than 2" square with 10 slots. The primers were 10 in a row all touching. I think is was the late 80's and a whole truckload of Federals went up. As I remember is was it...
  15. dinc

    Flat Dark Earth Ionbond?

    Re: Flat Dark Earth Ionbond? Googled ionbond flat dark earth, images. Some from reviews, hopefully they are labeled correctly. Might help.
  16. dinc

    Gunsmithing PTG Stealth Inlet

    Re: PTG Stealth Inlet ...More of my money goes to White City...
  17. dinc

    Gunsmithing PTG Stealth Inlet

    Re: PTG Stealth Inlet B&C stock. Good to know. Easy: 1-Drill out the bedding block to allow the pillars to fit in. 2-Cut away the bottom of the bedding block until it's lower than the pillars. 3-Clearance the stock around the DBM until the DBM fits nicely on the pillars. 4-Bed the action...
  18. dinc

    Gunsmithing PTG Stealth Inlet

    Re: PTG Stealth Inlet As stated the PTG Stealth uses the Badger A-5 inlet. The pillars set the height (distance from bottom of action to the dbm). USE the pillars. Don't screw with you action rails. The AICS mags feed between them.
  19. dinc

    Gunsmithing Questions about epoxy for filling fibreglass stock

    Re: Questions about epoxy for filling fibreglass stock Fill out your profile so we know where you are. Tap Plastics has a lot of information about glassing supplies, epoxy, fillers, cloth, and you can get small amounts for experimenting. Their staff will usually answer lots of questions...
  20. dinc

    $1800 to convert. What would you have bought?

    Re: $1800 to convert. What would you have bought? The Remington laminated stocks are excellent when bedded. 1000 yd BR guys prefer laminated claiming it helps dampen heavy barrels. $1800 would by decent scope and mounts. Bed a PTG DBM in there if he's going to shoot matches.
Top Bottom
Back
Home
Forums
Merch
Alerts