What do people do for the 3/16 hex key for the action screws. I've got plenty of hex keys but it takes a 2-1/2" long unit that will fit a 1/4 hex drive torque screw driver. Torque spec is 6 Newton Meters or 53 inch pounds.
Gunsmithing AICS AX Action Hex wrench
- Thread starter waste_knot
- Start date
Re: AICS AX Action Hex wrench
OK, figured it out. Just knowing you guys have my back must have inspired me to think.
Took a 3/16 allen wrench and cut the short leg off. slipped a 3/16 1/4" drive socket over the key and used the 1/4" hex by 1/4" drive adaptor with the torque driver.
On to the range!!
OK, figured it out. Just knowing you guys have my back must have inspired me to think.
Took a 3/16 allen wrench and cut the short leg off. slipped a 3/16 1/4" drive socket over the key and used the 1/4" hex by 1/4" drive adaptor with the torque driver.
On to the range!!
Re: AICS AX Action Hex wrench
I got a couple of long 3/16 allen wrenches, cut the short leg off, use it in a 3/16 socket on a torque wrench. Next garage sale find all get a 3/16 socket and epoxy one in.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2419855
I got a couple of long 3/16 allen wrenches, cut the short leg off, use it in a 3/16 socket on a torque wrench. Next garage sale find all get a 3/16 socket and epoxy one in.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2419855
Similar threads
