• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. dntworry

    Truing software

    This was AB's predictions before I changed anything Dope / also what strelok predicted: 505 - 13.25 MOA 605 - 17.5 MOA 705 - 22.5 MOA 805 - 28.75 MOA Not sure what else is needed
  2. dntworry

    Truing software

    Went out this weekend, great day little to no wind. Had issues with the .300WM but using my 6.5 had the same data mismatch. Steps performed: Re-zero Re-chrono Check scope level with a tall target and a 6ft level Tall target tests show my NF elevation tracking at 100% up to 30 MOA (did not...
  3. dntworry

    Truing software

    Thank you for the information, I will collect more data this weekend and report back.
  4. dntworry

    Truing software

    Lowlight, I am using their CDM for my specific bullet the Berger 215 hybrid rather than a G1 or G7 drag should I switch back to be able to fudge the numbers? Skookum, I will have to do more testing this weekend but as an example I was on target at 805 using 17.5MOA and the AB app is...
  5. dntworry

    Truing software

    It seems odd to me to have to adjust velocity when I got it from shooting through a labradar, is that normal ? I feel like the more likely solution is me entering something incorrectly just not sure what to change
  6. dntworry

    Truing software

    Probably been asked before but was unable to find anything. AB mobile app, it wants me to 'calibrate' my data with my 300WM at 1200+ and 2400+ but my local range only goes to 800 yards.
  7. dntworry

    6.5CM Quickload Help

    Looking for some data from Quickload if anyone would be willing to share Currently running my 6.5CM with Lapua brass (52.4 avg capacity) at ~2.9 COAL with 143gr ELD-X. I am going to try R16 and R26 and was hoping someone could give me a rundown with this setup and those powders. Thanks
  8. dntworry

    Range Report Which bullet you using - .300 win mag

    Berger 215 hybrid with H1000 is printing 0.2-0.5MOA 5 shot groups for me at 100 yards. Have yet to shoot any game with it but getting sub moa groups out to 800 yards (Max for my range)
  9. dntworry

    Rifle Scopes Scope Base Keeps Loosening, Please Help

    I had a similar issue and fixed it by buying a seekins precision rail and bedding it to my action. It has a integrated recoil lug and is held in by 4 screws. Otherwise Nightforce and DNZ Game Reaper make some direct mounts for the R700.
  10. dntworry

    6.5 Creedmoor

    After doing some research I picked up both RL26 and RL16 to try. I am loading 2.260 Length to Ogive for .020 jump in my rifle, OAL of roughly 2.9". Any suggestions on where to start and where my max pressure will be around?
  11. dntworry

    Rifle Scopes Nightforce ATACR™ 4-16x50 F1 and SHV 3-10x42

    Ended up picking up an ATACR 4-16x50 F1 for a new Tikka T3X CTR 6.5CM and could not be happier. Crystal clear and turrets feel great, have not ran a tall target test yet but seems spot on from previous data.
  12. dntworry

    Training Courses Training in OR/WA

    Looking for entry level training classes for precision rifle. 1000+yd range would be great. Thanks
  13. dntworry

    6.5 Creedmoor

    I've heard rumors factory Tikka barrels are "slow" as well but I'll reserve judgement until I work up a more stout load and report back.
  14. dntworry

    6.5 Creedmoor

    Loaded some 143gr and found a great node at 39gr for fire forming my new lapua brass. Only issue I had was it is very slow at 2450fps from my 24" Tikka T3X CTR. I tried up to 43gr without pressure signs but it was less than accurate. Once formed I will try to find a higher node otherwise will...
  15. dntworry

    6.5 Creedmoor

    Was thinking 143gr eldx, so I could deer hunt with it as well as bang steel
  16. dntworry

    6.5 Creedmoor

    Anyone have any load suggestions for IMR4350, I already have 8# and just ordered 200 new lapua brass.
  17. dntworry

    Rifle Scopes Burris XTR II - Return to zero issues

    It is not impossible however highly unlikely. Got the Burris rings and still had the same issue. Called support again and after they assured me it was likely not the scope they are going to take it for inspection.
  18. dntworry

    Rifle Scopes Burris XTR II - Return to zero issues

    Went over everything yesterday, nothing was loose, wish it was that easy. I am going to remount with Burris XTR Signature rings when I get them tomorrow to add 20MOA cant and resolve my "horrendous scope misalignment" and will test again.
  19. dntworry

    Rifle Scopes Burris XTR II - Return to zero issues

    Just getting into 'precision rifles', however I have a R700 300WM that I shoot half moa groups out to 800 yards (max at my range) currently. Not saying I am a perfect shot but you tell me what I should read from this - I place 3 all together to confirm current POI, dial up 1 MOA to get my zero...
  20. dntworry

    Rifle Scopes Burris XTR II - Return to zero issues

    The turrets did seem very stiff but I did not check the screws as I had not re-set the zero was doing the inital sight in having these problems, I will check
Top Bottom
Back
Home
Forums
Merch
Alerts