• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. D

    Masterpiece Arms CZ455 Chassis

    I'm gonna build a rifle soon in this chassis for R&D and will do a custom fitted Lilja 3 groove at 18" threaded. If they copied the factory inlet a timney should fit and if not nothing a little milling won't take care of. Keep you all posted
  2. D

    CZ 455 Build or run a 455 Precision Trainer

    Don't have a website but you can send me a pm and I can answer any questions you may have.
  3. D

    Anyone ever run a fenderson Barrel. Fun 10-22 build

    A drop in on a 10/22 imo is 90% effective. A cz 455 not so much. Too much variation in shank diameter and distance from receiver face to bolt face recess. A current lilja drop in has a shank OD of .707" and a shank length of 1.191". It uses a Benz chamber. The new lilja drop ins will be done...
  4. D

    First round "flyer" on CZ 455 Tacticool

    Your barrel suffers from cold bore fliers. This is mostly common in hammer forged barrels in my experience. Never had a match barrel suffer from this issue. You can try cleaning the snot out of the leade that some swear it works but in my experience it isn't worth the time or effort. If it...
  5. D

    DeLane Development Group Rimfire Ventures

    6 or 12 o'clock firing pin setup? Cost for an action?
  6. D

    CZ 455 Build or run a 455 Precision Trainer

    I've offered to buy 50 at once and cz has no desire to sell just the actions. What I do is buy complete rifles and deal with parting out the rest myself. I charge $200-$250 for an action as part of a build. With the stainless actions freshly out, the take off barrels are commanding premiums so...
  7. D

    CZ455 Action Screws

    You can also crack the stock if you tighten too much.
  8. D

    possible cz455 build- newb

    Not at 100 yards but the good news it isn't at 25 yards either lol. It's at 50 yards :(. Ya never know though you could get lucky ;).
  9. D

    possible cz455 build- newb

    If ultimate accuracy is the goal, a custom fitted barrel permanently attached is the only way to get it. A lilja with a setback to make headspace perfect with all supporting modifications done correctly with it is usually good for .2's-.3's. The new ones have Benz chambers so .3's at best is...
  10. D

    cz 455 giving me fits

    this happens more often when running a chassis setup on a rimfire or an unbedded traditional stock. Easy to fix, skim bed the entire action area of the chassis and it should be good to go.
  11. D

    Sako Quad HELP

    Barrel or mag well needs to be tweaked some for it to feed properly with an aftermarket barrel. I'd have the smith who built it fix it.
  12. D

    Best barrell CZ 455 action ?

    For a blank I like to use shilen, benchmark 2 and 3 groove, and a stash of custom lilja 3 groove barrels I have made. For the chamber I use one of my own design that I have fully tested against the EPS match, lilja match, Anschutz etc. I'll be taking that design to my grave :) (well actually...
  13. D

    Into to Precision Rimfire Shooting

    Pull the barrel first and then we can talk :). After you pull it, insert the bolt and make sure it's not binding.
  14. D

    Into to Precision Rimfire Shooting

    Justin makes a valid point that ammo can easily become your brick wall. Vertical can eat you alive when pushing the distance with a 22 LR even with match ammo. One thing that is certain that there is match ammo that is indeed consistent. The issue is most sporting rifles aren't capable to take...
  15. D

    Into to Precision Rimfire Shooting

    When you start running a true match chamber, you'll see real quick that cleaning is a must! In a factory barrel you can go much further before it's required but it's wise to do it in intervals to prevent a carbon ring. How often really depends on the rifle and in no way can you compare a factory...
  16. D

    22 rimfire chamber reamer choice

    I've used many different off the shelf ones and got the best performance from the EPS match. I decided to design my own and have two I came up with that have given better results. For an off the shelf choice the EPS match will be just fine.
  17. D

    Factory crown recut and accuracy correlation

    The biggest problem with these factory barrels that will limit the accuracy potential is the way they slug, the chamber and leade, and headspace. You can do anything you want but if the barrel has any of those 3 issues or more, it ain't gonna shoot lights out no matter what you do. Some of these...
  18. D

    Masterpiece Arms CZ455 Chassis

    Thats how I would do it. A benchmark could be done but if clearance is an issue, only .900" straight blanks and .920's are readily available. An 850 would need to be custom ordered but the shilen blanks are available and that taper should give perfect clearance.
  19. D

    Masterpiece Arms CZ455 Chassis

    A custom fitted shilen .850" straight should fit just perfect :).
  20. D

    CZ 455 Varmint Trainer / Anschutz 1416 T6 M

    Full done up Anschutz T6 with match barrel etc %5BURL=http://s129.photobucket.com/user/djdilliodon/media/FFB68432-8389-495B-B2C4-28BFD4B64215.jpg.html%5D%5BIMG%5Dhttp://i129.photobucket.com/albums/p202/djdilliodon/FFB68432-8389-495B-B2C4-28BFD4B64215.jpg%5B/IMG%5D%5B/URL%5D CZ 455 fully done...
Top Bottom
Back
Home
Forums
Merch
Alerts