• Get 25% Off Access To Frank's Online Training

    Use code FRIDAY25 and SATURDAY25 to get 25% off access to Frank’s online training. Want a better deal? Subscribe to get 50% off.

    Get Access Subscribe

Search results

Search the forum Search Articles
  1. Darqusoull13

    Optics WTS Leupold 5-25 Mk5 with H59 Reticles, Bobro 20MOA 35 mm mounts

    All PM's replied to. I'll sell without the mounts for $1750 Shipped, $1700 at a match local to me.
  2. Darqusoull13

    What are you buying for a factory 6.5?

    You can order the barrel extension on the JP site or call in to your preferred barrel maker for the pattern you need. I love my JP's but I know folks have preferences. I'll always say if you can swing the JP you wont be disappointed. They always perform.
  3. Darqusoull13

    Range Report Magnetospeed V3 Which one and why?

    V3 because it's easier to mount to 5 different guns when I go out to chrono. Magnetospeed makes awesome stuff and you can't go wrong. Just triple check with the rod before you torch one off into the bayonet ;)
  4. Darqusoull13

    Nemo XO Carbon vs JP LRP-07

    You will always be satisfied with a JP as far as accuracy. If you go the LTC route you can go a little lighter than the LRP. They are absolutely wonderfully smooth to shoot and tuned exceptionally well.
  5. Darqusoull13

    Optics WTS Leupold 5-25 Mk5 with H59 Reticles, Bobro 20MOA 35 mm mounts

    Leupold 5-25 Mk5 with H59 Reticles. Bobro 20MOA 35 mm mounts up for sale. $1850 each shipped, $1800 in person. I've used these for about 6 months of matches and they work well. I just don't shoot enough to have 4 of them. Not interested in any trades. Edited because I can't read a box label...
  6. Darqusoull13

    Best barrel length for suppressed AR-10?

    With the OSS you're going to be about as close to unsuppressed as it seems you can get with a suppressor in terms of back pressure. 16" might require a heavier buffer and some gas adjustment but I would NOT go rifle length for this. It's hard enough getting a 223 rifle length gun to run without...
  7. Darqusoull13

    Any downside to a heavy buffer?

    The Gas block, buffer, bolt, gas port size and location and springs are a system. The system can be tuned for more or less recoil. The system can be tuned for lower pressure as the bolt unlocks. The system can be tuned to run clean and reliable suppressed. The system can be tuned for all sorts...
  8. Darqusoull13

    JP Arca Setup

    Yep, ARCA rails are worth every penny and they hold even heavy versions of the LRP. I added the rails and the new weight kits to mine. For matches I'm a big fan of how the weights give me all kinds of extended surfaces to grip in positions.
  9. Darqusoull13

    Loading 6.5CM for A Semi Auto

    I run a pair of JP LRP-07's. This load should run super without having to touch your gas block and it should also be reliable no matter how dirty it gets. Likely wont matter what carrier you have either. My favorite load: 144 Berger Hybrid 41.5 grains H4350 CCI#200 Primer Federal Brass COAL...
  10. Darqusoull13

    6.5x47 Lapua

    They have shot phenomenally well out of 3 of my rifles in 6.5 Creed. Maybe not comparable to the 6.5 x 47 but the 144's were worth every penny to upgrade. That's coming from someone that also likes the 130's.
  11. Darqusoull13

    DeLane Development Group Rimfire Ventures

    It's in house, and the guys that are doing it are amazing.
  12. Darqusoull13

    Suppressors Sandman vs Nomad

    Weight and diameter are the big differences which come from the materials used in construction. The Sandman S is 17.7 oz and thinner where the Nomad is 14 oz (in direct thread). You can add the KeyMo adapter and the Nomad will be about the same weight, just larger diameter. The Nomad is just a...
  13. Darqusoull13

    JP Enterprises Silent Captured Springs?

    Is your weight removable? You can drive it out and go with a heavier 9mm SCS to keep the total mass the same. The Short Stroke SCS is by far the biggest upgrade I've run on my 9mm AR's.
  14. Darqusoull13

    Group Buys Aftermarket AI "Obsession" Chassis - Group Buy

    This was basically what I was looking at. I wonder if Mile High would offer this as a package for those of us not so familiar with AI's as to immediately go wrenching on one.
  15. Darqusoull13

    Question on AR-15 Pistol Build - Buffer and Arm Brace Question

    Just make sure you get the shortened Maxim size silent captured spring system. I could never get used to shooting the Maxims but I have some friends that love them because of how compact they get. I went with the SBA3 for my "pistols" until they became rifles after the government blessed me...
  16. Darqusoull13

    6.5 Creedmoor

    6.5 Creedmoor Federal Brass CCI 200 Primer 41.5 gr H4350 144 Hyrbid loaded to 2.800 OAL 2740 FPS out of my JP LRP-07 22" barrel BC trued spot on at 0.336 G7
  17. Darqusoull13

    Range Report Berger 144-gr Long Range Hybrid

    6.5 Creedmoor Federal Brass CCI 200 Primer 41.5 gr H4350 144 Hyrbid loaded to 2.800 OAL 2740 FPS out of my JP LRP-07 22" barrel BC trued spot on at 0.336 G7 0.6" at 100, not my best work but I wanted to get hits on clean steel at distance to true the BC. Shot the best group of my life at 1100...
  18. Darqusoull13

    Berger No BS BC Podcast Episode 1

    Really enjoyed this first podcast @lowlight . I'm very much looking forward to the rest of the series :)
  19. Darqusoull13

    JP Enterprises Silent Captured Springs?

    Worth every penny. You go from scraping and sproing to action closing being the sound you hear. More reliability and makes suppressed shooting a totally new experience.
  20. Darqusoull13

    DeLane Development Group Rimfire Ventures

    I'm partial to the can partially recessed in hand guard look myself.
Top Bottom
Back
Home
Forums
Merch
Alerts