Search results

Search the forum Search Articles
  1. T

    Suppressors Form 4 wait time

    Was 12/30 the certified date?
  2. T

    Suppressors Form 4 wait time

    Anyone who did the fingerprints at the kiosk get an e-form 4 approval back yet?
  3. T

    .30-06

    I also have IMR 4350, 4064, 4895, and some varget that I can probably trade for anything else worth trying. Bullets I’m considering are 180 accubonds and 178 ELD-X. Maybe 175 TMK. I can’t even load at mag length with this gun though although accuracy with most factory stuff has been pretty...
  4. T

    .30-06

    Anyone using RL17 in 30-06 with 178/180s? What kind of velocity difference do you see with temp change? With H4350 I’m getting pressure signs at 2700fps. 52.5gr RL17 gets me 2700 no problem at 60 degrees. 1x LC match brass. Need to back down the H4350 and see what I can safely get. Hit...
  5. T

    Silencer Shop News Update: ATF eForms Launch Imminent!

    That's good. Was the wording on the pin that caught everyone's attention. I hope the dash isn't an issue on serial #s. I don't remember if I looked at that or not...
  6. T

    Silencer Shop News Update: ATF eForms Launch Imminent!

    @mwiggi house right now…
  7. T

    Silencer Shop News Update: ATF eForms Launch Imminent!

    Yeah.... You're going to want to check into that. Search capital armory or whatever threads that were out there associated with giving dealers the pin #...
  8. T

    Suppressors Form 4 wait time

    No idea If it’s true but I’d understood the 1 year delay if you pulled a paper form was because the paper form wouldn’t actually get pulled until it was up for approval anyways, which could be up to a year out? Although with various steps in the approval process that’s slightly suspect. But I...
  9. T

    No Love for the 75gr ELD-M?

    If my replacement mags ever get here I will have room... As of today another 1-1.5 months out! Let me know if you want to rent one of yours 😂
  10. T

    .223 - 5.56

    Yes. Cut down lite (non fluted). 8/9 at 1.15" at 114 yards. I know I pulled 1 shot which I believe is the flyer. I shot 10 but I took out a wire on my fence with shot 1 so I ended w/ a 9 round group on paper. Was right about sunset and I'm shooting with a fixed 6x scope so I couldn't really...
  11. T

    .223 - 5.56

    24.3gr N140 in 1x LC18 brass w/ a 75 Gr ELD-M is getting me 2713 out of an 18.5" T3x.
  12. T

    No Love for the 75gr ELD-M?

    Searching around shows that there seems to be a strong preference towards the 77SMKs (and TMKs) over the Hornady 75gr ELD-M across multiple forums. On paper it seems like the ELD-M would do a bit better with the higher BC and is also a bit cheaper? Through my T3x over N140 I'm getting good...
  13. T

    East Texas gun range recommendations

    CSAT is in Nacogdoches. Not sure on availability of public access, but it's a cool spot. https://www.combatshootingandtactics.com/
  14. T

    Vortex lht 4.5-22 durability test

    So all of this for a guy who drop tested a rifle, and the rifle did not shoot to the same point of impact as it did before the drop. Form's testing procedure should be looked at as testing a rifle system as it does not isolate any single variable (scope included) and thus you cannot condemn any...
  15. T

    Suppressors Form 4 wait time

    Was on rokslide. Just one report and it was the guys shop not the actual guy posting but it’s plausible! 🤞
  16. T

    Suppressors Form 4 wait time

    Not arfcom. different forum.
  17. T

    Suppressors Form 4 wait time

    Rumor on another forum of a shop that just got their first e form 4 approved in 29 days…. Anyone else hearing of e form 4 approvals starting to come back? I’m at about a month but don’t have high hopes…
  18. T

    Kraft Data Driven Training: Try This

    One more Zeroed with my hand loads and then shot this with some factory stuff without adjusting zero. POI difference was ~3/4" lower for the factory ammo than my handloads. T3x Lite w/ a fixed SWFA 6x scope. Standing was off a tree trunk, kneeling off an upside down feed bucket (w/ bipod)...
  19. T

    How Flat Are These Primers?

    Loaded and shot some at 23.5gr today out of curiosity and primers look extremely similar to the 24.0 gr (maybe slightly more rounded). 40 degrees out. 24.0gr on top then 23.5 below Got 2648 avg over 5 shots so may just keep rolling with 23.5 for now til I get the barrel cut then re-evaluate.
  20. T

    How Flat Are These Primers?

    Thanks all. I'll pay attention as the temps warm up but will keep rolling for now. May tweak the load after the barrel gets cut anyways.
Top Bottom
Back
Home
Forums
Merch
Alerts