Search results

Search the forum Search Articles
  1. DRAM40A1

    Cheap JP 6 Creedmoor Build

    Snipers Hide member zandnubbz offered to give away a 22” JP 6 Creedmoor barrel in a thread a couple weeks ago. I commented and asked what he wanted for it. Even offered to pay the shipping cost but he insisted he sent it on his dime. Well, about three or four days later it’s on the back porch...
  2. DRAM40A1

    Will be testing new Palmetto 18" bbl with various buffers today-will report back

    I have an 18” Rainier Arms FN CHF with rifle length gas that runs very smooth with a full auto carrier and an H buffer. It’s a 1-7 5.56 though.
  3. DRAM40A1

    Magpul UBR 2.0 Question

    It has its own buffer tube. Do you have it in your possession?
  4. DRAM40A1

    PSA PA-10 Magazines, quick question.

    Greg, I’ve not used them in a PSA but Magpul 10 round mags work great in Mega Maten, DPMS, LMT, and Aero receivers I have.
  5. DRAM40A1

    Would like advice from .243 AR-10 owners! (First Build)

    Keystone Accuracy Craddock Precision White Oak JP Enterprise You might try a Wilson Combat for a budget build. I had a DPMS 243 Light Hunter but it had a 10 twist for lighter bullets.
  6. DRAM40A1

    Would like advice from .243 AR-10 owners! (First Build)

    High pressure bolt, +2” gas system, adjustable gas block.
  7. DRAM40A1

    Would like advice from .243 AR-10 owners! (First Build)

    I would strongly suggest 6 Creedmoor over 243 because of magazine constraints.
  8. DRAM40A1

    SOLD Hornady 727 pcs. 1x fired 6mm CM brass $200

    I’ll take these per our PM.
  9. DRAM40A1

    Tikka T3x CTR 6.5CM 24": Bullet set back?

    I have barrels I jamb the bullet and barrels that shoot well with as much as .100
  10. DRAM40A1

    AR10 6mm Creedmoor barrel

    I’d like to try it with Hornady 105 BTHP, I also have a pile of 90 grain Scenars. So, for real, what you want for it???
  11. DRAM40A1

    Tikka T3x CTR 6.5CM 24": Bullet set back?

    You measure in thousands of an inch. Typically I start .010 off the lands and work from there.
  12. DRAM40A1

    308 SBR

    I built a 12.5” 308 pistol. Mega Maten receiver set and a Bartlein barrel from Craddock Precision. I worked up a 155 AMAX load and then bought a 16” SR 25 and the 12.5 went to the back burner. It’s loud as shit and fun as hell. You want it build it. Easy as that.
  13. DRAM40A1

    AERO PRECISION IS OUT OF STOCK ON COMPLETE UPPER IN MY CART. ANYBODY USED RRA COMPETITION R3 18" UPPER???

    That’s fucking hilarious. Call WOA and ask how many Wilson Arms barrels they chamber per month.....?
  14. DRAM40A1

    I want to buy a PDW—What takes the cake?

    I’m wondering if your PDW is the same weapon you’d carry into combat?
  15. DRAM40A1

    Sidearms & Scatterguns Gen 5 Glock Connector Kits

    I recently purchased a Glock 17 Gen 5 MOS and I’m looking to lighten/ smooth up the trigger. I am looking at the Ghost 3.0 or the TTI 3.25. Anyone have experience with either of those or have a suggestion for another one?
  16. DRAM40A1

    Jetsurgeon GTG

    Excellent communication, fast shipping. Highly recommended!
  17. DRAM40A1

    AR10 buffer tube selections

    I’m running the same set up on an LMT lower with a KAC SR 25 upper, a 6 MM Creedmoor and a 6.5 Creedmoor. They all run great with this set up. I’m using the 5.4 oz H3 buffer but I think KAC uses an H2 buffer weight. Everything I’ve seen with the short/light 308 carbine buffer has issues with...
  18. DRAM40A1

    AR10 buffer tube selections

    I use Armalite extended length carbine tubes, 7 3/4 with 3.25” H3 buffer and Armalite rifle spring. Springco red spring works great also.
  19. DRAM40A1

    Need advice.... JP LPR-07 308 vs 6.5

    So, what did you do with the 260 barrel????
  20. DRAM40A1

    For Sale: .243 Win / 6mm Brass and Bullets

    I’ll take the 400 Sierra 85 BTHP but don’t have PayPal. Is a USPS money order acceptable?
Top Bottom
Back
Home
Forums
Merch
Alerts