Search results

Search the forum Search Articles
  1. svxwilson

    Optics Wts Vortex diamondback hp 2-8

    I will take it. Send you a PM
  2. svxwilson

    Reloading Equipment Montana buy/sell/trade page

    What I have: 5000 CCI450s MSRP What I want to trade for: Trade for CCI BR4 PM me what you got.
  3. svxwilson

    AR-10 6.5 Creedmoor Over Gas Issues Using SRP FC Ammo?

    Get yourself a JP "high pressure" bolt. Bet that fixes the problem.
  4. svxwilson

    Who's shooting a 22 creedmoor or 6mm creedmoor ar10?

    6CM Proof Carbon sending Factory Hornady black 105s and reloads with Berget Hybrid Target 105s have fed wonderfully for me. JP LRI-20 Receiver. Using Magpul 7.62 mags and a KAC mag.
  5. svxwilson

    AR15 Loads for longer OAL 2.36" for PRI window mags

    I just picked up some PRI window mags modded to fit up to 2.36" OAL rounds. I have never worked up loads for single loading or long mags like this. I am curious what your results have been with 223/5.56 rounds that are loaded long for single shot loading or out of mags like the windowed PRI...
  6. svxwilson

    GA Precision GAP-10 G2 or JP Enterprises lRP-07/LRI-20

    Definitely get the LRI-20. It is basically a LRP-07 (LRI-20 uses a LRP-07 lower) that is more rigid and provides a better barrel/handguard mounting system than the LRP-07 upper.
  7. svxwilson

    GA Precision GAP-10 G2 or JP Enterprises lRP-07/LRI-20

    +1 for the LRI-20 The below target was shot from a LRI-20 with a 24" Proof Carbon 6cm barrel. It was the try shot (1st shot) at 900 yards while running Franks weaponized math. 10-15 mph sustained winds with gusts in the 20s. JPs may cost a little more but its worth every penny. The next 3...
  8. svxwilson

    How do you be successful on Discord?

    Well I decided to become a paying member of Distill. I will report back if I have any luck. Already have the notifications out there for what I am looking for. Will be interesting to see of its faster than discord. Thanks for your tips fellas!
  9. svxwilson

    How do you be successful on Discord?

    Edit: Thanks for the tip on Distill. Downloaded it and we will see how well it works. That may be the "best pro tip" is showing me where to fish.
  10. svxwilson

    How do you be successful on Discord?

    I have been using Discord for about 2 weeks and havent had any luck getting anything I need (primers or powder). I can get to the website and see it in stock but after adding it to the cart the website crashes or during the checkout process the product becomes unavailable and the websites remove...
  11. svxwilson

    Aero M5E1 upper/lower set screw efficacy to combat play

    The most accurate ARs don't have any slop. A good shooter with consistent technique can make a sloppy receiver set shoot well but that is just because they are consistent not the rifle. IMO. For example, JP factory receiver sets feel like 1 piece until you remove the take down pins. JP custom...
  12. svxwilson

    Aero M5E1 upper/lower set screw efficacy to combat play

    JP oversized take down pins will solve slop issue quite well and no need to fuss with their older wedge pin. The wedge pin can come loose and requires more tools to take down vs the oversized pins. IMO Below is a link to the newer undersized and oversized pins...
  13. svxwilson

    All around gun

    Edit: Should have read how old the thread is first. Coming in a few years late with my reply. To give a reference on how accurate a JP 260 can be here is some bullet placement.
  14. svxwilson

    Semi Auto for LE

    A purpose built JP could do what your asking all day long. LRI-20 is what I would suggest.
  15. svxwilson

    Reloading Equipment SOLD

    SOLD 590ct 75 gr A-max .224 bullets 2 Lots Lot 1: 190 Lot 2: 400 Sold $125 shipped USPS priority
  16. svxwilson

    Barrel nut (over) torque vs Accuracy

    If you pull the barrel and lap and square the receiver face you should also thermofit the barrel to the receiver. Things you will need to thermofit are .001 or .002 shim stock, sharp scissors, rubber band and a heat gun or torch. Heat the receiver extension area and then quicky slide the...
  17. svxwilson

    Threadtite or not GEN3 Little Bastard

    Took it out, shot 20 rounds through it to re-zero and bang some steel real quick. Was about .7 mils low compared to bare muzzle. The G3 LB was still tight after the 20 rounds. 3-5 rounds per mag. Not shooting super slow but taking the time for good shots (except when banging steel, always have...
  18. svxwilson

    Threadtite or not GEN3 Little Bastard

    Hello, Question for those with experience with the Gen3 Little Bastard on their semis. Did you use the included threadtite on the barrel threads or did you just tighten it "just pass hand tight" with a wrench and call it good? My first time not using a jam nut etc with the muzzle device...
  19. svxwilson

    Scope mount for semi-precision AR10

    The Atlas your looking at is the same one I have. Great choice IMO. Especially if you want to be able to remove it quickly for whatever reason or use it on a different rifle. The LEAP looks cool for sure. Buy once cry once I suppose :). I sold 6 Vortex Viper PSTs to be able to afford my 2...
  20. svxwilson

    Scope mount for semi-precision AR10

    My go to bipod is the Atlas for medium-long range. Built rock solid, tons of accessories for them, may not be the lightest but you won't have to worry about breaking it either. They typically sell quickly on here in the for sale section and they hold their value well over time. I have 2, one is...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts