Search results

Search the forum Search Articles
  1. O

    M5 6.5 CR Shortstroking

    I built a 6.5 CR on Aero receivers using a 20" Proof barrel with a +2" gas system. I've tried it with a rifle length buffer system using the Aero M5 rifle springs as well as a Sprinco Green. It short strokes with both setups. I just put a carbine buffer tube on the rifle and tried a Sprinco...
  2. O

    School me on titanium actions

    Several action manufacturers have tried making them and ceased due to the liability involved. Titanium does not handle impact well and it was found that there was not much safety factor in them.
  3. O

    Suppressor wall for 308

    I wouldn't use 304. 17-4 is the better choice.
  4. O

    First post, thought some experts could reccomend a silencer.

    Check out the Rugged Radiant. I run mine on several gas guns and I have no complaints with it.
  5. O

    Sidearms & Scatterguns Pistol options under $2500

    The only thing I don't like is that it is an aluminum frame.
  6. O

    1-10x LVPO Comparison

    I Wondered if I would have that problem. At this point I'm not. One thing I really like is that it is a true 1x.
  7. O

    1-10x LVPO Comparison

    I just became a dealer for March Optics. I brought in a 1-10 and,a 1.5-15 both dual focal plane. Hard to say which is my favorite but these pretty much blow everything else I've played with out of the water.
  8. O

    Rugged Radiant

    I'm not a suppressor expert by any means. I did some research and decided on the Radiant as it checked the most boxes for me. Light weight, Full auto rated, no barrel length restriction and relatively low back pressure. It made it to my dealer yesterday and I just got back from doing the...
  9. O

    Ballistics Advantage barrels question... warranty issue approaching epic fail

    All 8 of my BA barrels shoot 1MOA or better. Most are right around .7. Not bad for a 165.00 stainless nitrided barrel
  10. O

    C&H Precision 2-12 LPVO/MPVO

    I agree.
  11. O

    Desert Tech WLVRN

    DT is local ro me. I own a machine shop and they are constantly sending prints for me to bid. I always no bid them as they have screwed every shop in a 100 mile radius that they've dealt with. They are a hard pass from me.
  12. O

    White Oak Armament 20" SPR or 20" Service?

    I have both and unless you are mag dumping, I don't think you'll see much difference between the 2. I have 7 WOA barrels, all wilson blanks. They are all great shooters.
  13. O

    Looking for a 6.5 or 308 patterned rifle NOT ar10

    Robinson XCR M I have 3 and they are incredible.
  14. O

    Bighorn Origin Build Thread

    Staball 6.5 does amazing things for 3006 and .280AI.
  15. O

    Sidearms & Scatterguns Pistol options under $2500

    I own all 3 of those. Personally, my new favorite is the DWX. Think of it as a 2011 that doesn't need 100 dollar mags. I have 3 of them and I run them in USPSA. They have been rock solid for me. More so than my 2011's.
  16. O

    Large deviation when loading .223

    New brass
  17. O

    Large deviation when loading .223

    I started using H4895 for .223 recently. I have a whole bunch of Wolf primed brass left over from a few years ago so I started doing some work up on that. I am using a 69 gr Match Burner and have used 23.8 gr 24.0 and 24.2 grn of powder. My OAL is 2.255" My velocity is coming in with 60 ish...
  18. O

    Failures with drop in triggers

    How many here have actually had a drop in trigger fail on them? What failed? How much use before it failed?
  19. O

    Who is your new ar15 barrel builder?

    I pretty much only use White Oak Armament anymore. I've never had a bad barrel from them and I've used over 100 of their barrels on different builds.
  20. O

    Ballistic Advantage Nitrided barrels

    Sorry you didn't read the original post.
Top Bottom
Back
Home
Forums
Merch
Alerts