Search results

Search the forum Search Articles
  1. C

    What lube is everyone using

    Re: What lube is everyone using Mobil-1, $6 will get you a lifetime supply.
  2. C

    Gunsmithing What is Best product for removing Shoe Polish

    Re: What is Best product for removing Shoe Polish Basic training works like a charm
  3. C

    Gunsmithing mcmillan 50 BMG barrel torque??

    Re: mcmillan 50 BMG barrel torque?? You may have to heat the barrel/reciever joint, I have taken a few of them apart, all of them had JB weld or something similar on the threads.
  4. C

    Gunsmithing cerekoting the bolt a few questions.

    Re: cerekoting the bolt a few questions. Do it, won't hurt a thing
  5. C

    Does anyone have a .338 LM sub moa load with SMK's

    Re: Does anyone have a .338 LM sub moa load with SMK's 91 grs [email protected] OAL 250SMK/scenar. This is sub 3/4moa any day.
  6. C

    precision rifles... show em

    Re: precision rifles... show em Bob10475, This was built to shoot 240SMK's R-P brass, wlr primer, 67.1gr/4831, OAL3.495 Easy sub .5MOA 2625FPS
  7. C

    precision rifles... show em

    Re: precision rifles... show em R700 300 WM trued up reciever/tuned up factory trigger. Lilja 24" 10twist Sendero stock inletted for CDI bottom metal US Optics SN-3 3.8-22 TPS scope rail/Seekins rings. Gunsmithing by Woody@ X Ring Accuracy
  8. C

    Gunsmithing Cerakote/DuraCoat guys, question?

    Re: Cerakote/DuraCoat guys, question? I don't think it's so much the quality of the airbrush, but rather the need to clean it immediately after spraying. I have been using the same Paasche for at least 3 years.
  9. C

    .300wm - .300wsm

    Re: Loads for .300WM--.300WSM 300WM Remington action/Lilja barrel 24" 1-10twist Rifle built by X-ring accuracy Remington brass WLR primer 67grs H4831 240SMK COAL 3.490 Accuracy in the .1's&.2's
  10. C

    Gunsmithing Rough Barrel

    Re: Rough Barrel Certainly a lot cheaper to put a few lapping rounds through it. I have seen that improve some pitted barrels. What have you got to lose?.
  11. C

    Gunsmithing Rough Barrel

    Re: Rough Barrel If the barrel only has 120 rds through it, how can it be "too far gone". I would shoot some firelapping rounds through it,shoot them like you were shooting a group. I'd bet it will show improvement.
  12. C

    Gunsmithing Finishing a muzzle brake

    Re: Finishing a muzzle brake No need to treat it in any way. Coat it and shoot it, looks real nice.
  13. C

    Movie Theater Dogs of War

    Re: Dogs of War The movie is great, the book is better.
  14. C

    Gunsmithing .50 Bolt Action Rifle

    Re: .50 Bolt Action Rifle I am guessing you are left-handed, if that is the case have you tried a right hand .50. The reason I ask is that I am a righthanded shooter and much prefer a lefty action in .50cal because they are somewhat awkward to keep reaching over. To me it is much easier to...
  15. C

    Gunsmithing PTG BOTTOM METAL

    Re: PTG BOTTOM METAL My experience has been the exact opposite, Dave has always returned my calls and has been very patient with my ideas no matter how off the wall they are.
  16. C

    Short Barrel AR's Why?

    Re: Short Barrel AR's Why? To take your point a little further, why should we have AR's at all. What possible use could a sportman have for one(sarcasm)?.
  17. C

    Summer pressures

    Re: Summer pressures I am sure that there are any number of less sensitive powders, RE-15 has worked really well year round for me.
  18. C

    Range Report How many rounds is too much in a session??

    Re: How many rounds is too much in a session?? Shoot them all, just take your time. Don't overheat the throat or yourself for that matter.
  19. C

    Laid my nephew to rest today.

    Re: Laid my nephew to rest today. That is heartbreaking, I can't imagine your pain.
  20. C

    Gunsmithing Tornado Technologies

    Re: Tornado Technologies Looks great and you certainly can't beat that for service.
Top Bottom
Back
Home
Forums
Merch
Alerts