Search results

Search the forum Search Articles
  1. -Time-

    Diagnose my heavy bolt lift

    That’s what I’m banking on. When I load up this next batch I’ll measure them all and make sure they’re bumped back .002” it’s what I have done previously and I’ve had no issues so I’m gonna assume some brass just didn’t happen to get bumped. Same 8lb of powder. They did have a little lube in...
  2. -Time-

    Diagnose my heavy bolt lift

    Feel free to add whatever, even if it’s only a slightly similar issue any insight would be awesome. I’m hvaing my mind blown right now, by every metric I can compare these cases by they should be the same, yet they’re obviously not. I have ~70 cases that are in the same position these cases...
  3. -Time-

    Diagnose my heavy bolt lift

    I was measuring ID, my bad. OD for both over pressure and non are .340 on the nose. I also realized I measured oal of the cases on the primer, the actual oal of the cases are 2.608 for both over and under pressure. Here’s pics of both case heads And a pic of the chamber if anything obvious...
  4. -Time-

    Diagnose my heavy bolt lift

    I was not. That seems like a really “interesting” problem to try and diagnose though!
  5. -Time-

    Diagnose my heavy bolt lift

    One over pressure cause actually doesn’t fit a bullet, but I’m assuming it got dinged up somehow. The difference is very minute, I measured them and it was something like .309-.3095” for the over pressure case, .310-.3105” for a non pressure case. I could see carbon build up or something causing...
  6. -Time-

    Diagnose my heavy bolt lift

    I had not, I cleaned before I shot it, and run a bore snake through the barrel once after a range trip The over pressure cases do seem a little more snug. 77gr is stout for sure, but I did this load development over the summer, in 75-80* weather, and I’ve been using this load the entire time...
  7. -Time-

    Diagnose my heavy bolt lift

    So I went to shoot my 300wm over the weekend, I had 20 rounds left from a previous loading, and loaded up the last 11 from my batch of 3x fires brass. I shot all 31 rounds over the weekend, and 9 of the rounds fired had heavy bolt lifts, and clear ejector marks. I’m running 77gr H1000, under a...
  8. -Time-

    Rifle Scopes Should I buy a Tangent Theta?

    If im not mistaken, ATI is the US distributer, and they work with dealers.
  9. -Time-

    Replace AICS Spigot with Rail

    I wish I would’ve know about him, instead of spending $400 on the badger IMUNS-C when I don’t have clip on NV... yet.
  10. -Time-

    Range Report 225 ELD-M vs 230 Hybrid Target

    I’ve used a g7 bc of .367 in my 300wm, and it matched exactly at 1k. A g1 of .730 matches my g7 drop at 1k. (225gr eld-m @2797fps, 45*f, 45%humidity, 54ft above sea level, 30.383inhg.)
  11. -Time-

    Help me find a specific action

    Yeah I’ve kind of dumped the AW mag idea at this point. I think being able to top off a magazine through the port would be nifty, but it doesn’t seem worth the extra headache in trying to find an action. I think I’ll just end up ordering a nucleus with Barloc when they come back and stock, it...
  12. -Time-

    Help me find a specific action

    Do you know of any actions that fit all of my requirements besides using savage small shank threads?
  13. -Time-

    Help me find a specific action

    To be perfectly honest I’m not a phenomenal shooter. On a good day I can stay about 1/2” at 100 with my 300wm, maybe a little less. Unless you’re telling me shoulderless barrels don’t shoot better than 3/4 or 1/2 moa, the rifle will always be better than me. I also imagine the whole PRS shooter...
  14. -Time-

    Rifle Scopes Should I buy a Tangent Theta?

    If you have the money yes. I have been 100% happy with mine. There’s lots of scopes on the market that can fill 70-80% of a perfect scope, but the TT has it all. If you like the gen2xr, either buy a new one, or wait until the new reticle is out and buy a used one to save a little money (not...
  15. -Time-

    Help me find a specific action

    Actually looks like the nucleus works with savage small shanks, so that’s at the top of my list for now. I believe the only requirement it doesn’t fit is the AW mags, but I imagine that’s hard to pull off with CRF
  16. -Time-

    Help me find a specific action

    The vector looks sweet, but my hope for an action is really to be able to buy off the shelf prefit barrels to replace at home, avoiding a smith, but it seems the vector requires specifically spun barrels to take advantage of their quick change system.
  17. -Time-

    Help me find a specific action

    Apparently my google-fu is weak, because I’ve spent days unable to find an action with these features: -Savage small shank threads for easy barrel swaps with a nut -60* bolt throw (AI ball style bolt knob preferably) -integral recoil lug -r700 pattern -drops directly into an AIAX chassis...
  18. -Time-

    ARC Barloc - Estimated Shipping Date????

    Anyone know if the barlok will fit with an AIAX chassis?
  19. -Time-

    Ultimatum Deadline Action

    I don’t mean to bring up and old thread, but has anyone run one in an AIAX chassis?
  20. -Time-

    LEARNING TO DRIVE A .308 SEMI AUTO TACTICAL RIFLE

    Are the training videos back up? I cancelled my subscription because the videos weren’t up...
Top Bottom
Back
Home
Forums
Merch
Alerts