Search results

Search the forum Search Articles
  1. -Time-

    Custom Remington 700 300 win mag

    Yup. The PX forums are for selling stuff, but you have to have at least 101 posts. Alternatively 101 posts can be purchased under the subscription tab for like $20.
  2. -Time-

    Hornady 6.5mm ELD-x Match bullets: segmented G7 BC

    ^ I have ballistic AE and I never knew that, Thanks!
  3. -Time-

    Hornady 6.5mm ELD-x Match bullets: segmented G7 BC

    Just as a slight correction, weight doesn’t actually affect BC or carry more velocity. Generally higher BC bullets are heavier in a given caliber because the bullets are longer, but as we can see with something like the warne flatline bullets, they have extremely high BCs and less weight. BC is...
  4. -Time-

    In what ways is the 300 WM superior to the 7mm?

    The 225 has worked well in my 300wm. Do you happen to have G7 BCs for the 180eld? I notice the g1 for my 225gr ELD load has me supersonic out to over 1900, where the G7 numbers have me supersonic out to 1661. Quite a bit of discrepancy there. ultimately OP I’d say if you can find good quality...
  5. -Time-

    Range Report New Sierra 150 SMK for 6.5

    Just saw the Instagram post on them, very interested in loading them in 6.5cm. (Note: my velocities for the SMK are just conservative guestimations based on other factory loadings. I’d imagine they’ll be able to be pushed a bit faster than 2600, but I prefer to under estimate than over...
  6. -Time-

    In what ways is the 300 WM superior to the 7mm?

    The higher weight 7mm bergers have bc’s in the .330-.340, the higher weight .30cal bergers and hornadys are in the .340-.360s. What are you using that’s getting smoked by a 7mmRM, much less the 7mm-08?
  7. -Time-

    300 win mag and 225 eld-m

    I’ll 2nd the non magnum primers having lower velocity spreads. Last part of load development I tested Winchester non mag vs mag, and the non mags were ~15fps slower, with half the SD and ES of the mag primers.
  8. -Time-

    In what ways is the 300 WM superior to the 7mm?

    Don’t forget about the heavy .30cals in the 300 if you reload. I’m launching a 225gr ELD-M at ~2800fps from a 26” barrel, with a Doppler G7 bc of 0.367. The 212 eld-x is ~0.336,
  9. -Time-

    Rifle Scopes Vortex AMG new reticle??

    +111111111 a light weight 3-15 with this reticle would end up in my safe instantly. unfortunately the 5-25 is too big, so I’ll end up with a 4-16 ATACR Mil-C unless something earth shattering comes along.
  10. -Time-

    Suppressors What suppressor would you recommend for .223/5.56 AR?

    I have a Griffin armament Recce 5, and recommend it if you're still gonna wear ear pro. It's a K sized can, with mid-large can performance. Taper mount system is GTG. its only ~14.5oz with mount, but 17-4 so it'll stand whatever abuse you give it. It doesn't have the lowest back pressure, and...
  11. -Time-

    300 Win mag brass

    I'm using Norma, w/ the 225gr ELD-M and 77gr H-1000. It seems pretty consistent, and if I'm not mistaken Norma provided the brass for lapua when they "made" 300wm brass.
  12. -Time-

    Hornady 6.5mm ELD-x Match bullets: segmented G7 BC

    Running 3 calcs won't work, because you're predicting the bullet with that BC off the start, so when it gets to it's actually velocity range it'll already be too low. Use the BC for your velocity range, and true it or record your dope.
  13. -Time-

    Larue 18" Stealth Barrel?

    Are you pissed at S&B for charging like 1k more for every scope, all the years before they dropped the prices on their scopes? be glad they dropped the price on some of their products. If they had never dropped the price on their stealth barrels you wouldn't be pissed at them right now, just...
  14. -Time-

    Bipod prone - what has helped you?

    I shoot prone off of a concrete slab with a Harris bipod on my 300wm. Lowlight's advice is what has helped me the most, along with 8541 tactical's video on the prone position. I: get square behind the rifle, it really makes a huge deal. Then I load the bipod with my torso, generally how 8541...
  15. -Time-

    Need a new suppressor cover (not tab gear)

    +1 for the rifles only.
  16. -Time-

    Larue 18" Stealth Barrel?

    I say go for it. I've been shooting my 18" stealth since 2/21/16. 1577 rounds so far, 99% mk262 or my clone, and accuracy has been superb. Clay pigeons at 300 yards is cake. As long as you can call wind, a 5" plate at 500yards isn't hard. I don't usually shoot paper, but the last time I did at...
  17. -Time-

    Aics + Harris wobble problem

    I have a Harris on my AICS in 300wm. I applied blue locktite, and torqued it down good n' tight, knock on wood I haven't had any problems since.
  18. -Time-

    Problem with *DPMS type* .308 build

    The Bcg lugs are square It does look like they're a bit rounded, but it doesn't seem to be as drastic as the gen2 lugs. I wouldn't think they were gen2 lugs, as proof's website only references Dmps pattern, nothing about gen2
  19. -Time-

    Problem with *DPMS type* .308 build

    so I've got this *DPMS style* build, Aero precision upper, lower, bcg, Raptor/AXTS charging handle, proof research barrel. Test fired, its got ~40 rounds through it, no problems there. I went to mount a scope today, and checking the chamber I noticed chips on the barrel extension lugs. The...
  20. -Time-

    Rifle Scopes TT warranty

    I sent my TT525 in because the laser etching on my turret was off by maybe 1/16th of an inch, if not less, but enough that I could notice it. Did the RMA form, shipped it off, and had it back within 2 weeks. No bs, no problems. buy with confidence. attached is my turret before it was sent off...
Top Bottom
Back
Home
Forums
Merch
Alerts