Search results

Search the forum Search Articles
  1. p5200

    Gunsmithing where to order Anschutz rimfire replacement parts

    Re: where to order Anschutz rimfire replacement parts Thanks very much for the quick reply!
  2. p5200

    Gunsmithing where to order Anschutz rimfire replacement parts

    Anyone know of where I might be able to order a new magazine guide which the back rail on the mag slides on to? I think mine has gotten bent I've bought a brand new replacement magazine but, still seems to scrape the bullets to much when chambering. The rifle is a model 1710 d hb. Thanks!
  3. p5200

    tighter bolt closing on FL re sized loaded rounds?

    Re: tighter bolt closing on FL re sized loaded rounds? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: myerfire</div><div class="ubbcode-body">I use a RCBS precision mic in .223. Take a measurement of your fired round and then adjust your die so bump the shoulder...
  4. p5200

    tighter bolt closing on FL re sized loaded rounds?

    Re: tighter bolt closing on FL re sized loaded rounds? The Forster directions say to screw the die down through the lock ring until it makes contact with the shell holder. then, tighten the lock ring screw and this is with the press handle pulled all the way down. If the die is slightly...
  5. p5200

    tighter bolt closing on FL re sized loaded rounds?

    Re: tighter bolt closing on FL re sized loaded rounds? Thanks very much! I will order one.
  6. p5200

    tighter bolt closing on FL re sized loaded rounds?

    Re: tighter bolt closing on FL re sized loaded rounds? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: myerfire</div><div class="ubbcode-body">I use a RCBS precision mic in .223. Take a measurement of your fired round and then adjust your die so bump the shoulder...
  7. p5200

    tighter bolt closing on FL re sized loaded rounds?

    Re: tighter bolt closing on FL re sized loaded rounds? Thanks very much for all the quick advice!
  8. p5200

    tighter bolt closing on FL re sized loaded rounds?

    The once fired, re sized, trimmed and deburred rounds are tighter to close the bolt on than, new brass with same bullet seating depth. I've seen some of you talk about bumping the shoulder back .001-.002". Is that maybe what I need to do? and if so, how do I go about doing it? I test fired a...
  9. p5200

    using Hornady OAL gauge question

    Re: using Hornady OAL gauge question Thanks very much, I'll try that.
  10. p5200

    using Hornady OAL gauge question

    Re: using Hornady OAL gauge question I haven't tried the Sharpie method yet. I used the first lightly felt contact point then tightened the thumb screw, and took that measurement using the bullet comparator and caliper. Thanks!
  11. p5200

    using Hornady OAL gauge question

    When pushing the bullet to find the lands on my Savage 10fp .223, I feel it hit against something but if I push a little harder, it pops through all at once and goes to another final stop. Should I go by the first contact point I feel or, the second and final stop to get my OAL measurement. The...
  12. p5200

    tight bolt close on Anschutz 1710 d hb .22 LR?

    Does anyone else with this model or similar, find the bolt hard to close on most but not all, rounds of Wolf Match target ammo? Also, some rounds I have to push pretty hard just to push it fully into the chamber before,,I can close the bolt do I have a feeding problem maybe? the cheap federal...
  13. p5200

    bullet seating depth vs. barrel life

    Does seating bullets closer, to the lands speed up the process of throat erosion (in general)on rifle barrels? Thanks!
  14. p5200

    First load testing for my Tikka t3 lite 25-06

    Re: First load testing for my Tikka t3 lite 25-06 I used the Hodgdon H4350. 48 grns. and Sierra MatchKing 100grn. PS. I think I listed Hornady by mistake on the target.
  15. p5200

    First load testing for my Tikka t3 lite 25-06

    I'm new to hand loading but, this is my first load for this gun now I'm going to try to fine tune it. this is only at 50 yards I think I forgot to add that info on the target. Trying to get a load worked up with some Sierra GameKing 117 grn. next, for deer season. any advice how I might tighten...
  16. p5200

    Hodgdon Varget vs. H322 for best accuracy in .223

    Re: Hodgdon Varget vs. H322 for best accuracy in .223 The range will be mostly 100yds. with Hornady V-max 55grn. and Sierra MatchKing 69grn. Savage 10fp with 1 in 9 twist. Thanks!
  17. p5200

    Hodgdon Varget vs. H322 for best accuracy in .223

    Re: Hodgdon Varget vs. H322 for best accuracy in .223 I have some Varget I've been using on my 55 grain V-max I think I'll get some H322 to try with the 55grn. and some 69 grain Sierra MatchKing bullets to try with my Varget. Thanks!
  18. p5200

    Hodgdon Varget vs. H322 for best accuracy in .223

    Has anyone compared these two powders for accuracy for the .223 Rem. If so, what size weight range/style in bullets did each powder perform it's best? I realize it will vary with each gun but just looking for ball park figures in general. Thanks!
  19. p5200

    Need advice for best powder choice 25-06

    Re: Need advice for best powder choice 25-06 I was looking at my Lyman 49th edition manual but, didn't see any Reloader 17 listed but a lot of other RE. numbers were, listed ? I'll have to check elsewhere for info on that powder. my Lyman listed 47 grain H-4350 for starting for 100 grn...
  20. p5200

    Need advice for best powder choice 25-06

    Re: Need advice for best powder choice 25-06 Well, I found some H4350 powder and some CCI primers now I just need to wait till my order comes in next week. Thanks folks!
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts