Search results

Search the forum Search Articles
  1. exhogflyer

    AICS. VS Manners

    Re: AICS. VS Manners Nope, just drop it in and torque it.Has it's own DBM...thats one of the things you need to look at also when you compare them.AICS is a complete system, whereas with any stock such as Manners (I have 2 love them) you need to factor in which DBM you will want.BTW I have...
  2. exhogflyer

    Barrel Question

    Re: Barrel Question $300 ?
  3. exhogflyer

    ..

    Re: .308 specific reloading info for 1000+ Very good info thanks for the links!
  4. exhogflyer

    Brass for 300 Win Mag?

    Re: Brass for 300 Win Mag? Sometimes it works out like this, but overall I'm glad for the input at least it gives me some ideas.Think I'm going to try Hornady as I've yet to hear much negative.I wish Lapua still made it also......wonder why they stopped?
  5. exhogflyer

    Reduced .338 Lapua Loads

    Re: Reduced .338 Lapua Loads 88gr of H1000 is the lightest load listed, that and a good brake will do about all you can to minimze recoil. He may be better off with another caliber....
  6. exhogflyer

    Crushed shoulder when seating bullet

    Re: Crushed shoulder when seating bullet I may be wrong, but I think that variation is caused by imperfections in the tip of the bullet.You will probably need what is called a meplat trimmer to get them all perfect.I don't think those few thousanths will make a measurable difference.
  7. exhogflyer

    No pressure signs but

    Re: No pressure signs but 15 rds at 200? Thats pretty darn good shootin' and I think it's also a pretty good load.Bet that works good on some steel!
  8. exhogflyer

    Brass for 300 Win Mag?

    Re: Brass for 300 Win Mag? Thanks for the help gentlemen.....
  9. exhogflyer

    Brass for 300 Win Mag?

    I'm going to be loading for a new 300WM build shortly.I generally use Lapua brass in everything except my gas guns ( they beat it up too bad) but I see Lapua no longer makes it.I was considering Hornady but I don't have much experience with it.What would you guys recommend as far as consistancy...
  10. exhogflyer

    Chase even more accuracy or get in the field?

    Re: Chase even more accuracy or get in the field? Well, I suppose if you wanted....you could load up say, 5 each in various lengths and go see where your grouping ends up.If that was me I'd call it a day and go spend the time pulling the trigger as they shoot good enough for me.Some bullets...
  11. exhogflyer

    Reloading 50 BMG

    Re: Reloading 50 BMG You might try a different lube for case resizing.....it does matter with that big case.I have tried many, and so far a light coating ( wipe it on with a paper towel) of Mobil 1 synthetic oil I find gives THE lowest lever force.You will be amazed at the difference....
  12. exhogflyer

    Crushed shoulder when seating bullet

    Re: Crushed shoulder when seating bullet Simple solution....screw the die in until it touches the shell holder, then back it out 1 turn.Now when you seat a bullet you won't bottom the neck on the collet.
  13. exhogflyer

    My first bolt action build

    Re: My first bolt action build Looks like a good first choice......however you'll probably need another job soon to fund the next couple of rifles once the disease spreads ! Good luck and post results after your range work....
  14. exhogflyer

    Reloading 50 BMG

    Re: Reloading 50 BMG I have the Lee and it works fine.Their "non standard" threads are only for the .50 die set,they give you an adapter that allows most any other caliber die set to work.Hard to beat for the money...
  15. exhogflyer

    49.5gr Varget - 155 Lapua Scenar - on the lands???

    Re: 49.5gr Varget - 155 Lapua Scenar - on the lands??? That's a pretty stiff charge! If you have no pressure signs launch it, but I'm wondering what you get for MV and how long your brass lasts.In my Savage I'm using 46gr and getting 2900...
  16. exhogflyer

    Savage 10 Expectations

    Re: Savage 10 Expectations My Savage 308, with the load it likes averages around .50" @ 100 yds most days when I'm in the groove.I've just had the Mcmillan stock pillar bedded so I'm expecting that to improve slightly.Not that you suck at reloading, you may not have found what your rifle...
  17. exhogflyer

    Sav or Rem action to build

    Re: Sav or Rem action to build I recently went thru this same issue of what to build on for a 260.I compared prices for a similar build on each action and they were within $100 of each other.I have both Savage and Rem and like each,there are no losers here.I ended up going with a Remington...
  18. exhogflyer

    Remington wholesale pricelist??

    Re: Remington wholesale pricelist?? Exactly.....that's like walking into someone's business and asking "what did that REALLY cost you"......
  19. exhogflyer

    Lapua 260 rem brass

    Re: Lapua 260 rem brass <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shootist2004</div><div class="ubbcode-body">I got mine today. </div></div> How does it look?
  20. exhogflyer

    Lapua 260 rem brass

    Re: Lapua 260 rem brass Just ordered mine from Graf's...JUST! Thanks for the tip...
Top Bottom
Back
Home
Forums
Merch
Alerts