Search results

Search the forum Search Articles
  1. Dave-O

    Rayners April 1000 yard match results

    Re: Rayners April 1000 yard match results In case anyone wants to know. I shot a 7 wsm that didn't cheat the wind like its supposed too. Or maybe I didn't guess it right. Oh well.
  2. Dave-O

    New Lapua .308 win brass

    Re: New Lapua .308 win brass For my load, like most, just load and shoot right out of the box. After that, I then run them through a .337 bushing and blast away.
  3. Dave-O

    My test - Chargemaster vs. Sartorius

    Re: My test - Chargemaster vs. Sartorius Welcome to OCD. I did basically the same test when I setup my sartorius, it proved to me that my chargemaster did in fact throw within the .1gr that it claims. I paired an omega trickler with it to get down to 1 kernel accuracy.. Where I...
  4. Dave-O

    Gunsmithing 7 WSM Reamer Dimensions Tolerances

    Re: 7 WSM Reamer Dimensions Tolerances I just pulled my 7wsm print from PTG. @ .200 from the bolt face its .555 My brass measures .553 on a fired case. I can't get as exact as you are on measurements on the brass. I suspect I'm real close though. Not sure what to tell you otherwise...
  5. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring That was a good challenging stage...
  6. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring How many guys were able to find, let alone hit both targets on the countersniper stage through the logs?
  7. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring Double hit. Ooops
  8. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring Congrats to Dave.P for the win. And a job well done for Aaron Addy for coming in second. Hugo, you can say one thing about shooting with us, your gonna laugh. A big thanks goes out to the Rayners for they're hard work...
  9. Dave-O

    READE RANGE "SPRING" SNIPER CHALLENGE FULL

    Re: READE RANGE "SPRING" SNIPER CHALLENGE Miker. Sorry for your loss.
  10. Dave-O

    Who makes the best WSM flavored DBM?

    Re: Who makes the best WSM flavored DBM? That depends. How long do you intend on loading your ammo? I'm running Surgeon bottom metal on my 7wsm, and its working for me.
  11. Dave-O

    Re: "Melonite barrel treatment" (DONE)!!!!

    Re: "Melonite barrel treatment" (DONE)!!!! Turbo... From what I've seen on the 2 rifles that I've had melonited, the before and after is night and day on copper fouling.. On my 308, I don't even think of cleaning it for close to 400rds, the jury is still out on my 7wsm.. In my opinion, if...
  12. Dave-O

    READE RANGE "SPRING" SNIPER CHALLENGE FULL

    Re: READE RANGE "SPRING" SNIPER CHALLENGE Miker.. Did you make the NEW hide LARGE GUY compliant? Just saying momma's cooking this winter has not treated me well..
  13. Dave-O

    Dillon 650 Improvement

    Re: Dillon 650 Improvement <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carter Mayfield</div><div class="ubbcode-body">Why don't they come like this? For a while, I was keeping a finger on the incoming shell in position 4 to keep it from hard indexing. I have...
  14. Dave-O

    284 seating depth question

    Re: 284 seating depth question Are you wanting to single feed them, or run them from a mag? Are you wanting to touch the lands or are you planning to jump them PM turbo54 He says he has a .088 freebore reamer, see how close he is to the lands
  15. Dave-O

    Dillon 650 Improvement

    Re: Dillon 650 Improvement On a 650, the shell plate doesn't get raised, just the center bolt. Another mod to do with the bearing is to clip about half a coil off the spring that is under the detent ball, it will smooth out the transition from each position.
  16. Dave-O

    Dillon 650 Improvement

    Re: Dillon 650 Improvement The bearing and shims are also available from McMaster-Carr. I've used them on a 650 for a couple years while loading 9 major for USPSA. It definitely is worth the time to do this mod. Part numbers are. 2 shims. 6093930...
  17. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring I can't let you guys with the short mags have all the fun.
  18. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hugo121175</div><div class="ubbcode-body">I took your advice and got that tri-pod.... I may never need it. That is, until I need it.... <div...
  19. Dave-O

    Rayner’s SE Ohio Spring Sniper Challenge 3/31-4/1

    Re: March 31-April 1 Rayner’s Southeastern Ohio Spring Hugo. I'll be there.
  20. Dave-O

    Headspace OK, body too fat... 284 sizing issue

    Re: Headspace OK, body too fat... 284 sizing issue Do you own the reamer that was used on your chamber. If I'm not mistaken you could use that reamer to make a body die.
Top Bottom
Back
Home
Forums
Merch
Alerts