Search results

Search the forum Search Articles
  1. K

    Help with a Remington 40X Trigger

    Re: Help with a Remington 40X Trigger 10-4 so as I am turning that screw counter clockwise, or backing it out - should I be taking 1/4 turn increments? Even less? Again I just want to take about 1.5LBS off.
  2. K

    Help with a Remington 40X Trigger

    Re: Help with a Remington 40X Trigger Right, I don't really want to mess with it if it involves taking the trigger apart, I just saw that "screw" right there and thought "could it be that easy?"
  3. K

    Help with a Remington 40X Trigger

    The trigger below is a factory Remington 40X in a standard .308 Police gun, 2011 built. After practice on the range and practice dry firing, I still cannot get used to the weight of the pull. I do not have a trigger pull gauge however it just seems a little high for a bolt rifle. I do not...
  4. K

    Gunsmithing Hollow Ground Bits

    Anyone know where to get a good deal on a large set of bits? combo flatheads (thick ones) torx, hex, etc? Do these have to be had via brownells or can money be saved just buying them through northern tool or harbor freight?
  5. K

    Cannon Gunsafe

    Has anyone drilled into the walls of their safe? Need to install some hooks to hang stuff up. Any idea what the material behind the cloth is? How deep can you drill etc?
  6. K

    homemade rear bag

    Re: homemade rear bag Where are you guys getting the nylon? Local fabric store?
  7. K

    LEOs - need help with Pepper Spray...dont laugh...

    Re: LEOs - need help with Pepper Spray...dont laugh... deftech hands down.
  8. K

    Safariland "3-Gun" Case

    Re: Safariland "3-Gun" Case My rifle is 44" OAL, so looks like I gotta stick with the Safariland, too bad because I think I like the 42" condor better.
  9. K

    Franklin Camo Planner binder for $2.99

    Re: Franklin Camo Planner binder for $2.99 Anyone know where to find some plain grid paper to fit these 3 hole pattern?
  10. K

    Cleaning Bolt Gun W/McMillan Stock Saddle

    Is there a good way to do this? Special rod, or bore guide? Also it seems like my saddle always gets pushed down rendering it useless, anyway to keep it in place? I don't want to go any harder than thumb tight on the knobs.
  11. K

    Safariland "3-Gun" Case

    Re: Safariland "3-Gun" Case Anyone tried one of the Condor 42" cases? Possible to stuff a 45" rifle in there and stretch room? http://www.condoroutdoor.com/15242doubleriflecase.aspx
  12. K

    Safariland "3-Gun" Case

    Anyone else out there make a 46" double case like this? Link to Safariland 3 Gun Case
  13. K

    Leave AICS Mags Loaded?

    Any reason why AICS 5rd/10rd mags would be any different than standard ar/ak mags, i.e.) can they be left loaded for extended periods of time?
  14. K

    Gunsmithing Bolt Issue

    Re: Bolt Issue just a standard bolt, and i think it might just be manufacturing the problem but pushing up while pushing the bolt in. but still a good excuse to upgrade...
  15. K

    Gunsmithing "Gunsmith" Lamp

    Anyone know where to find a very sturdy magnifying lamp? It seems like all of the ones that Staples, Office Max, etc. are cheap garbage. I need something that will stay in place. Very useful piece when working with small screws etc.
  16. K

    Gunsmithing Bolt Issue

    Rem 700 SA, seems like the bolts comes back too far, and sometimes when I am pushing it back forward, if I am not 100% parallel to the bore it gets hung up. Any ideas or is this normal and I am just now noticing it?
  17. K

    Borka Wrench

    Re: Borka Wrench Anyone around Raleigh, NC have one I can look at? I'm used to the dial type wrenches.
  18. K

    Borka Wrench

    Before I buy one, is it worth the extra $30 to get all of the extras? I am wondering I will need an extension to get to action screws.
  19. K

    TIS Sling Installed Wrong?

    Re: TIS Sling Installed Wrong? thanks i don't know why that seemed so hard.
  20. K

    TIS Sling Installed Wrong?

    While installing this thing I took off way too many tri-glides or whatever they are called, now i can't figured out if i put it on right. any suggestions?
Top Bottom
Back
Home
Forums
Merch
Alerts