Rem 700 SA, seems like the bolts comes back too far, and sometimes when I am pushing it back forward, if I am not 100% parallel to the bore it gets hung up. Any ideas or is this normal and I am just now noticing it?
-
Having trouble using the site?
Contact support
Gunsmithing Bolt Issue
- Thread starter kmc0929
- Start date
Re: Bolt Issue
I gave up my factory bolt. I sent in the rifle to Mark at SAC and he reamed the action out for a PTG bolt. Its the best upgrade I did to it, well beside an aftermarket barrel.
I gave up my factory bolt. I sent in the rifle to Mark at SAC and he reamed the action out for a PTG bolt. Its the best upgrade I did to it, well beside an aftermarket barrel.
Re: Bolt Issue
I would check the bolt stop and make sure it is working properly. If the bolt stop isn't damaged and is working properly then it may be something you're just starting to notice. I don't know how old your action is or how long you've been shooting that action but if you will notcie the Surgeon action wrench for the 700 they will have a I or II stamped on them the II has the cut out for the newer model actions with the anti-bind rail in them. My point is the 700 especially the older ones have been known to bind thus the reason for the newer ones with the anti-bind rail.
I would check the bolt stop and make sure it is working properly. If the bolt stop isn't damaged and is working properly then it may be something you're just starting to notice. I don't know how old your action is or how long you've been shooting that action but if you will notcie the Surgeon action wrench for the 700 they will have a I or II stamped on them the II has the cut out for the newer model actions with the anti-bind rail in them. My point is the 700 especially the older ones have been known to bind thus the reason for the newer ones with the anti-bind rail.
Re: Bolt Issue
Here's a trick.
When I used to shoot NRA highpower I learned to place my thumb right on the cocking piece when cycling during rapid fire strings.
Problem solved.
C.
Here's a trick.
When I used to shoot NRA highpower I learned to place my thumb right on the cocking piece when cycling during rapid fire strings.
Problem solved.
C.
Re: Bolt Issue
Do you have an aftermarket bolt handle conversion or is your handle factory stock?
Do you have an aftermarket bolt handle conversion or is your handle factory stock?
Re: Bolt Issue
just a standard bolt, and i think it might just be manufacturing the problem but pushing up while pushing the bolt in. but still a good excuse to upgrade...
just a standard bolt, and i think it might just be manufacturing the problem but pushing up while pushing the bolt in. but still a good excuse to upgrade...
