Search results

Search the forum Search Articles
  1. Subwrx300

    Rifle Scopes Burris XTR3!!!

    My only complaint about the XTR3 is that I don't have one yet! C'mon Burris! Get that Brown Santa Truck loaded up!
  2. Subwrx300

    WTS/WTT: Match 223, 224 Valkyrie and 6.5CM Precision rifles

    I could include one 10round PMag or possibly a 5 round AICS mag with bolt gun.
  3. Subwrx300

    WTS/WTT: Match 223, 224 Valkyrie and 6.5CM Precision rifles

    Which 6.5? The gasser? Yes I believe I've got 2 mags that can go with rifle.
  4. Subwrx300

    WTS/WTT: Match 223, 224 Valkyrie and 6.5CM Precision rifles

    PMs answered.
  5. Subwrx300

    Triggertech Special For $125.99

    Area419.com has diamonds and specials on sale (while supplies last) through 7/7/19. https://www.area419.com/product-category/core-components/triggers/ Just another option!
  6. Subwrx300

    WTS/WTT: Match 223, 224 Valkyrie and 6.5CM Precision rifles

    Still available. TTT.
  7. Subwrx300

    Data: Starline 223/556 Brass Consistency

    Updated with fired brass data. Very good brass consistency!
  8. Subwrx300

    Data: Starline 223/556 Brass Consistency

    I searched up and down for an H20 case volume comparison that included LC and Starline but had tough time finding much data; most of it was case weight (which doesn't really show anything). So, here are results of a small test on a new batch of 1,000 Starline 223 Brass. I sampled 21 new cases...
  9. Subwrx300

    Rifle Scopes Current state of MOA and MIL

    Considering the Mil XT is Mil only reticle....Ummm, go with Mils? Lol.
  10. Subwrx300

    Impact Precision vs Defiance

    For the most part, yes. But you have to look at barrel cost differently: Traditional barrel (non-prefit) - $350-400 barrel blank + $200 cut/chamber + 100 Threading = $650 - $700 installed plus you don't have your rifle for 4-12 weeks depending on the smith's workload. smart guys will have 2-3...
  11. Subwrx300

    Issues with load development

    Magneto mount: some use them but I work in precision velocity measuring equipment (albeit doppler radar) and, typically, issues with data are mainly from setup issues. I would suggest mounting to barrel. I have seen slight POI shifts with magneto speed (usually higher) but I would suggest you...
  12. Subwrx300

    Issues with load development

    1.920 is max according to specs, 1.922-24 is likely still okay though. I trim mine to 1.908 to reduce need for trimming a bit between 3-4 firings.
  13. Subwrx300

    Issues with load development

    To mirror what others have said and add a couple of things jump out to me: HOT loads... Pushing 6.5CMs to 2800-2850 is usually close to max or slightly past (powder dependent obviously). 43gr R16 is right at limit of pressure (if using SAAMI pressure standards) and lot to lot variation + temp...
  14. Subwrx300

    WTS/WTT: Match 223, 224 Valkyrie and 6.5CM Precision rifles

    Prices dropped; TTT. Target pics and load Dev available upon request if not posted above.
  15. Subwrx300

    Ruger Precision Rimfire

    Definitely would help identify if mag/bolt are issue but also have to be very consistent in how they are placed into chamber. I.e. slide in by hand completely (best way) vs setting nose partially in chamber then finished by bolt close (not so good).
  16. Subwrx300

    Manners vs McMillan cheek riser clamp system.

    I have 3 manners with Thumbwheels. Each of them is slightly different in how much torque I need to secure cheekpiece solidly. I found that a very small strip of thin masking tape helps reduce the force needed to clamp. Put an1/8" wide and 1" long on side the forward guide rod. Acts like a...
  17. Subwrx300

    Ruger Precision Rimfire

    @vaguru hit the nail on head: Add foil tape or even duct tape to mags to ensure they are firmly planted in receiver (no for/aft wobble or play). The first round or two will feed at different angle than the rest causing change in bullet shape/damage to driving band. Use 320 or 400grit sand...
  18. Subwrx300

    Suppressors 6.5MM Suppressor: Which one?

    30 Cal TB Ultra 9... I run mine on 223, 6mm and 6.5mm. specifically got .30 cal to ensure no chance of ever accidentally sending round through baffles. I use the CB mount for mine to swap back and forth between rifles. When removing and replacing can, POI shift is the same every single time...
  19. Subwrx300

    WTS/WTT: Match 223, 224 Valkyrie and 6.5CM Precision rifles

    PMs answered. To the top for bit.
  20. Subwrx300

    Advanced Marksmanship Technique for rope/bungee/chain &spring supports

    Apologies, I meant when "he" posted (@Diver160651 ). Thanks for catching!
Top Bottom
Back
Home
Forums
Merch
Alerts