Search results

  1. Gasgun

    Form 20 Timeframe

    Last one I did, I emailed the form to them and got the approved form back in about 3 weeks.
  2. Gasgun

    LMT .308 MWS

    I would try it stock with the RC2 before changing anything. I have the 16” SS barrel, not the 13.5”, but mine runs smoothly with no excess gas with my SF RC. Gun is as received from LMT. If after trying it stock with the can mounted you feel the need to make changes, the BRT gas tube is a much...
  3. Gasgun

    Shims, crush washers... both? SF3P

    That isn’t a crush washer. It is used on barrels that do not have a relief cut at the base of the muzzle threads. SureFire sells shim kits if you need more. Use the Rocksett. It doesn’t negatively affect performance.
  4. Gasgun

    FDE NIGHTFORCE scopes (and mounts) finally available to COMMERCIAL MARKET!

    Are these going to be the only FDE models released? No ATACR 4-16 or 5-25?
  5. Gasgun

    Mounting SureFire SOCOM556-RC2 to a DD MK18 10.3" Pistol

    If your DD was built in the last few years, it should have a proper sized gas port. The SureFire is an excellent choice for several reasons, particularly the fact that it is a low back pressure can. I run one with a Colt 10.3” barrel. An adjustable gas block is unnecessary with this combination...
  6. Gasgun

    Suppressors Thoughts on Backpressure-- 5.56 RC2 vs Nomad-30

    What are you trying to accomplish with a change to the Nomad? Your post doesn’t state your objective. Is it greater sound reduction? Lower back pressure? I shoot lefty and have the SureFire mounted on uppers with Colt barrels of 10.3”, 11.5” and 14.5” length. All have standard gas ports for...
  7. Gasgun

    Suppressors Selling Suppressor in MT

    You can sell directly to another individual in State. I did this several times when I was a Montana resident. One Form 4 transfer. $200 tax paid. Do not involve an SOT for an in-State transfer. That would require a transfer to the dealer and then a second transfer to the buyer, doubling the...
  8. Gasgun

    best carbon remover?

    I use Johnson/Evinrude engine tuner to clean suppressed AR’s. It’s a foam. Spray it on, let it sit a few minutes, carbon wipes off with a rag.
  9. Gasgun

    Form 1 supressors mass denial.

    Gun owners really are our own worst enemy.
  10. Gasgun

    Night Vision PVS-14 Housing Value

    Found a couple PVS-14 housings locally. The tubes and lenses were installed in a dual housing, they have everything else (battery housing, switch, illuminator) One is L3 manufacture, the other is from TNVC. They both look new. The guy is unsure of what he wants for them. Any ideas on what would...
  11. Gasgun

    LMT .308 MWS

    That looks really good! I’ve got a few cans of Aervoe sitting on a shelf in the gun room waiting for me to gain the courage to paint my beloved MWS. These pics are inspiring. I’m getting closer…
  12. Gasgun

    5.56 becoming obsolete

    I would be willing to bet that all branches of the US military, if it still exists, will be using 5.56 10 years from now.
  13. Gasgun

    Rifle Scopes Vortex Razor 1-6 Gen 2 Non-E vs Vortex Razor 1-6 Gen 2-E

    I had a set of Aadland caps on my II-E and yes, they were noticeable when shooting. I removed them and went with a Scopecoat. https://sentrytactical.com/sentry-standard-3mm-scopecoat-optics-covers/
  14. Gasgun

    Radius side mounted - How well does it work?

    I have my Radius mounted at 9:00 as well. I’m running it on a LMT MWS with a Simrad KN-253 so I don’t have another option for placement of the Radius. I don’t have a ton of rounds downrange with it yet, but so far it has been accurate and held zero. If I end up going to a PVS-27 or PVS-30, I...
  15. Gasgun

    Help Me Setup My SCAR 17

    I think that a LPVO is the way to go on a 17. I run a 1-8 ATACR on mine. May have considered the 1-10 Razor if it had been available at the time. Quality mount is an absolute must have. I use the ADM Delta. PMM sling cups are nice to have. PMM also sells a variety of grips modified to work with...
  16. Gasgun

    Frustrated Deciding on 1x Scope!

    I’ve got the ATACR on a SCAR 17 and love it, but I think that it’s overkill for 200 and in. I don’t think that FFP has any advantage over SFP at those ranges, either. I have a 14.5” 5.56 AR with a Razor HD-IIE/RMR combo that works well for the kind of use that you are planning. The RMR is...
  17. Gasgun

    Glocks

    Possibly, but it’s far more likely to be based on someone’s lack of experience. I have had several people over the years express similar concerns. Nearly always, a little training is all it takes to get them over that fear. The fact that Glocks (and nearly every other poly framed, striker fired...
  18. Gasgun

    SOLD Surefire M952V IR/White Flashlight w/ switch- $175 shipped

    This is from the batch that @ilikebmxbikes had for sale back in October. The bag has been opened (that’s how I received it) but it hasn’t been mounted or used. Decided to go a different route. Selling for what I paid for it, $175.00 shipped. Accept Venmo, Zelle, PP.
  19. Gasgun

    Glocks

    I’ve got a Gen 4 and a Gen 5 19. I prefer the Gen 5. Mostly due to shooting lefty, I like the ambi slide release. I also prefer the grip and the trigger on the Gen 5.