Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Work envelope it pretty small 16" on the X, then you have the rotary axis and the tail stock. You'd be doing good to get a 12" barrel in it for fluting. I don't think the cabinet has a door on either side to allow you to extend work outside of the cabinet. The 6000 RPM spindle really limits you...
It's still on the project list, the scope mount was a Rem 700 mount, it made poor contact with the receiver, in fact it looked like someone tried to super glue it to the receiver in a poor attempt to bed it. So I have to replace it with a true Weatherby mount. It's been in limbo due to the lack...
Any reason you didn't go with PhasePerfect for that amount coin? One side note, if you're running a late model CNC with it, you might have to invest in a buck/boost transformer to get the voltages within mfr. spec.
If it's annealed 0-1, is should cut as easy as anything else. If you're trying to cut a hardened piece then you'll have to use one of the suggested methods. Make sure the blade you're using isn't too coarse, you need a min of 3 teeth in contact with the material so you'll need at minimum a 24TPI...
Accubeam Laser in Sarasota, FL is another vendor with the proper equipment and FFL. Accubeam Laser Marking - Specializing in Laser Engraving and Marking
I do CNC engraving of AR's all the time. Normal job is the RH side above the trigger pins 2-3 lines center justified and blackened. .070" high, .006" deep. Very discrete, not a billboard. I can do the side of the mag-well as an alternate location or any flat surface. Turnaround is typically one...
I know John & his wife and he is a stand up guy. If you google his name you'll find he has won numerous matches, IIRC he won 1st place at last years NRA long range championship and of course he builds the rifles that he shoots & wins with.
Math, it's all about math. CNC machining is a collection of different skill sets more so if you are a one man operation. You have to understand manual machining, materials, methods. You have to understand the programming environment typically Mastercam & Solidworks. I use OneCNC as it's more...
I use an Iwata Kustom TH it's the only air brush that I found that has a fan tip as well as a standard round pattern, it also has a traditional spray gun trigger as opposed to the normal top mount air brush trigger. The optional Custom Grip Handle is a must have in my opinion as well. It sprays...
Chad uses/used Devcon Fasmetal 10 HVAC #19770. He might be using something different now, he seems keep that kind of info to himself these days which is understandable.
Shimming the bolt is the first thing I'd do. You didn't mention the stock but I've seem one aftermarket stock that needed the bolt handle relief opened up, the handle bottomed out on the stock and wasn't allowing the bolt to fully close.
I wouldn't say Savage rifles suck. Though I've seen my share of Remington 700's that do, out of the box anyway. I've setup & shot customers Savage rifles, the 10FP, LRPV's Model 10's, 12's every one of them have been impressive shooters out of the box. For the price, I don't think there is...