Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Natchez primers and other https://www.natchezss.com/e/2023/february-01?in_stock_only=1&sc_src=email_546175&sc_lid=62189762&sc_uid=okOFQ1xu0F&sc_llid=838559&sc_eh=8d7b6f7853617aad1&utm_source=emarsys&utm_medium=email&utm_campaign=20230201_Ammo_21295
https://www.powdervalleyinc.com/product/servicios-aventuras-small-pistol-primers/?__s=9n1nowecsfq0ntxzklrb&utm_source=drip&utm_medium=email&utm_campaign=Small+Pistol+Primers+In+Stock+Now%21 Small pistol primers powder valley
I do mine with chrono 1 shot each at 1/10th increments starting at lowest to highest charge. Once I do that normally I find 3 nodes ,low,medium and high then I load the medium charge at 1/10th lower and 1/10th higher and same on high node 5 shots each. Then I find best 5 shot grouping/node in...
Yeah I agree , I just took what someone said for granted and after 3 reloads brass was flowing bad. I'm testing 40.8 to 41.5 and I can see there is a node there. Gonna turn that old brass in my century 21 lathe and see if I can reload it a few more times at a lower charge. Even though the 42.7...
140 ELDM Went today with chrono and saw where 41.2 @ 2770 FPS and 41.3 @ 2773 FPS for one node and also 41.4 @ 2795 FPS and 41.5 @ 2788 FPS so thinking one of those might work out. Will load 10 of each and see which might be better but I think its going to be a toss up. Only thing I'm loosing (...
I load 42.7 of 4350 and after 3 reloads I'm loosing accuracy. I used new lapua brass and resize neck and body ( redding or forster dies ) separately and through the 1st 3 loads all is well but now on the 3rd it almost looks like the neck needs to be turned ( with century 21 lathe ) as the...
I have redding buttons and there tech guys says there strait through so that should not be a issue for me but thanks good info still because I ended up with a wilson button and might have used it later on.
Thanks to all I am getting .0135 ( 3/4's neck surface ) pretty consistently with lapua 223 brass with taking off bare minimum. I probably could go .0130 and be perfect with it but for my 1st batch of brass I would rather go less and have a little give later if needed. Oh the idea of have 2 or 3...
I am in agreement. I was kinda Leary of anything below .010 on any of the above stated calibers just for safety . Think for safety reasons I'll stay above 0.11 and have a buffer from 0.10 . Agreed measure 1st and only take enough off to be concentric.
I got a century 21 neck turner and starting with 223 then going to use it with my 6.5 and 308 and my question is what is minimal wall thickness safety wise on those 3 calibers ? I was assuming nothing below 10 thousandths would be safe and just looking for clarification and if my assumption is...