Search results

I'll have to look but I may have some once fired Hornady 204 brass and possibly a box of 50 unfired new brass. If your friends 204 is a factory gun it'll have a 12tw barrel so I'd stick with 32-35gr bullets. I've had a couple 204's a CZ 527 and Tikka, still have the Tikka, and they both shot...

Any thoughts on how the Banish22 RF suppressor from Silencer Central would stack up against the other top rated cans? Specs look good. 5 3/8 long and only 4.1 oz is pretty light for a can that is rated up to 5.7x28 and 17/22 Hornet.

If you're looking at a 7-300 Norma Imp build maybe take a look at Defensive Edge 284 Terminator as another option to consider. Shawn always has dies available for his Terminator cartridges and you can even buy formed brass from him as well. They pretty much use Lapua or ADG brass and he...

3088-3100 with 68.5gr RL26 and Berger 180 Hunting VLD from Hart 26in barrel. I've shot a few Hornady 175 ELD-X through it and they were a little over 3100.

RL26 and N565 should be two top performers. I have a 7mm Blaser Mag which is nearly a twin to the 7PRC and I'm using 68.5gr RL26 with 180 Berger's.

My 6-284 is a no turn chamber and has a 12tw Lilja barrel. I shoot 75gr Vmax using necked down Lapua 6.5-284 brass with H4350. My load is fairly moderate and shoots 3650. There's a lot of powders that'll work well for the 75gr and under bullets weights, RL26/25/22/23/16/17, 4350, 4831...

Haven't seen it mentioned but the new 7mm PRC looks to be, very, similar in case size and shape to the 7mm Blaser mag, a well designed cartridge that was commercially available but never really got much attention from anyone.

I've yet to see a 14tw 22-250 that didn't like the old 52gr Amax or new 52gr ELD-M which is essentially the same built.

Maybe it's already been mentioned but has anyone used Flitz Bore Cleaner and if so how well did it work for you? Says this particular Flitz product is non abrasive. https://www.flitz.com/gun-bore-cleaner/

Does anyone use the bino thermal scanners like the Pulsar Accolade Pro with the LRF or the N-Vision Atlas?

How do these two compare to one another are there any discernible differences between these two?

Thank you

Greg, did you by chance measure any of this stuff, in water, for case capacity? I've heard Alpha's brass is on the thick side and has a little less case capacity than the others.

Haven't really had mine all that long but the Triji MRO came pretty highly recommended so that's what I put on my 300BLK pistol.

:devilish: made me do it.

Yeah I've never had any issues with feeding in a 22-250 so I'm not sure why that'd even be a concern. I don't have a 22-250 that feeds through a det. mag setup but my 20-250 runs a HS Prec. det mag setup and it feeds like butter.

I don't think you can really go wrong with either. My 22-250 is a Kelbly built gun and wears a 18in Brux barrel. Since I already have hundreds of Lapua 22-250 brass, even though I think the 22CM is a better designed case, when I toast the barrel in this one I'll go right back to another 22-250...

I've shot a truck load of Berger 75gr VLD's in a 9tw 22-6mm which is just a little bigger than a 22-250AI and I'm currently using 80gr ELD-M in my 8tw 224 Terminator. Both bullets shoot extremely well. With the heavies, I'm guessing RL17 or RL26 will be the top performer on velocity with...

The 220 Swift IMO is the OG of the hot rods! It's been around since what the early 30's or something and still holds a special place in many hearts, my own included, but its Achilles heel is the available brass for the Swift is mediocre at best. If someone can talk Lapua in to making 220 Swift...

I love that bullet it shoots extremely well from my 224 Terminator, it wears a 28in 8tw Krieger and I'm launching them at 3650.