Search results

Re: GUNSITE XLR & BULLET TEST PHASE 2 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Noel Carlson</div><div class="ubbcode-body">My take on these results is that solids manufacturers need to finally realize that it is fruitless to pretend that the inherent...

Re: 338 Bullet Testing / Demonstration LV Nev. a-hull, every muzzle velocity recorded is listed in the PDF I posted, along with some basic statistics. I posted the link in my second post after the results post, it is there for everyone who wants to see it. Here is is again since you missed...

Re: 338 Bullet Testing / Demonstration LV Nev. Wadcutter, based on these results, I can say that there is larger variation of the BC with the solid bullets compared to the jacketed bullets. For most jacketed bullets tested, we routinely got about 0.75 percent variation across all the shots...

Re: 338 Bullet Testing / Demonstration LV Nev. Thanks for the nice words everyone. I also put together a PDF with all the information about the fired rounds. It includes the atmospheric conditions for every shot, as well as the recorded muzzle velocity. I do not have any load data, but...

Re: 338 Bullet Testing / Demonstration LV Nev. Finally what everyone has been waiting for: <span style="font-size: 26pt"><span style="font-weight: bold"><span style="text-decoration: underline">The Results</span></span></span> The full PDF can be found here...

Re: 338 Bullet Testing / Demonstration LV Nev. Frank, (and everyone else) I am almost done post-processing all the data. It is a very time intensive process. I have been working on it 5-6 hours a day since Monday. I am about 95% done, then some quality checks and we can publish for...

Re: .375 Chey Tac Neck Turning ? To answer your last question, rubber strap wrench on the muzzle break should solve your issues.

Re: Total Nightforce Elevation and Windage Adjustment I have a NF 5.5-22x56, and when I checked it, it had 98.5 MOA of elevation. I do not remember how much windage it had, but it is plenty. Do not sweat the fact the numbers are not exactly as advertised.

Re: 6.5mm 142smk vs 139 scenar I have shot both the 123 Amax and 140 Amax through my DPMS LR-260. Both bullets loaded to mag length in my chamber were jumping at least 75 thou, and both bullets had good shooting loads for a gas gun (3/8 MOA). I have never heard of anyone having to jam the...

Re: .308's from 1233 yards on an F-Class Target Here is the webpage for the bipod shown on that rifle. I do not own one, but I got to meet Dave about a week ago, and it is on my list of things to buy for my new rifle. http://www.lraccuracy.com/ Also, very nice setup Darrell.

Re: Any advise to a good load for 6X45? PM inbound

Re: Hot NEW rifles from Savage Interesting, releasing a 338LM and coming standard with a 9 twist barrel. Seems like they are listening to their customers.

Re: When to tumble? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbo54</div><div class="ubbcode-body">First off, NEVER tumble loaded ammo. You are really asking for trouble doing this, the dangers are many: 1. Possible (unlikely) that a bullet could strike...

Re: looking for powder charge for Hornady 68gr match p5200, how long is the barrel on your Savage? Also, what is the COAL that you can fit in the magazine with the Savage?

Re: Bullet design question Out of curiosity, how did you get 4.9 bars of dynamic pressure? With knowing more about the geometry, I can not check your math. But I am assuming that calculation is based on oblique shock theory. Please report back here if you decided to make some.

Re: 6.5mm Bullet LR/ELR performance jrob, I have shot my 6.5-06 out to a mile with 140 Bergers. I was getting 3175 fps out of them, so at 1760 yards, there were just starting to approach transonic speeds. I had very good results, hitting a 12 inch square steel plate on the third shot...

Re: Any one use or herd of American rifle co? Here is a pic of my ARC rings. They are holding my NF 5.5-22x56 on top of DPMS LR-260. I am very pleased with the rings. My favorite feature is the return to zero. Every time I have to take the scope off the rifle for some reason, I have never...

Re: Looking for people who use IMR 7828SSC mclevela, H1000 is on the short list of powders that I did not test in my 6.5-06. I tried RL22 and H4831SC, but both of them were way too fast. I tried Retumbo, and it seems to work well. IMR7828SSC is next on my list, probably followed by H1000...

Re: lead casting/ loading info need. STP, I tried the link you give but it does not seem to work.

Re: 260 Brass Forming When I am at the range, I pick up any 308 cases I find laying around (mostly Fed GMM cases) and then turn it into plinking brass for my 260. Turning 308 brass into 260 brass is a lot of work. First, I FL size the brass in a 308 die. Then I turn the necks of the cases...