Search results

Re: Marine Tex - Release agent ? Brownells spray on.

Re: Anybody got a 6.5 Lapua Redding S Type FL die? It almost sound like a 6X47 Lapua die sliped by and got stamped and shiped as a 6.5x47... any way good luck, and please post what redding had to say...Marry Xmas..Joe

Re: TUNING FACTORY REM 700 TRIGGERS Tripwire,Your right, the older ones seem to be built a lot better than the new crap we get now days...anyway Merry Xmas. Joe

Re: Anybody got a 6.5 Lapua Redding S Type FL die? Sound like the small area below the bushing and before the shoulders is under size.. It needs to be larger than the bushing you are using. Call Redding and explain. Merry Xmas..Joe

Re: TUNING FACTORY REM 700 TRIGGERS They do make kits with lighter springs to drop a factory rem. trigger down to 16 to 20 ounce area. But to go that low without the new spring... well I'll leave that for the average idiot....

Re: TUNING FACTORY REM 700 TRIGGERS Even with the old trigger you can only get to about 2 to 2.5 lbs. but it's still safe at that..

Re: Remington 700 Issue Sometimes a shame what we have to work with, but your doing the right thing by going 8-40

Re: Vihtavuori Powder I shoot allot of N135 in a 30x47 (hunter bench rest) ,very clean burning and meters well..

Re: Help choosing manual case trimmer Again for wilson..

Re: new TOY! Nice score, a new baby for the shop.

Re: Bushing or NON-Bushing Die set.- Other Questions- I really like the standard Redding S die, useing the correct bushing to size the neck and the under size expander just to hold in the depriming pin. Also like the Wilson in line bullet seaters.

Re: What cause my primers to look like this? Bush that thing..

Re: How does copper hurt accuracy??? I have a bit different thought on copper fouling, It came from some where? Its off your bullet, and its smeared down the bore,carbon over copper,copper over carbon, and it starts to layer and build up. Each time ripping copper of the bullets jacket... I...

Re: Not just another " which is best thread" USO/Premi Premier 3x15 single tern GEN II XR for me and wont give it up.

Re: Good action for the remington 700? +1 for a stiller, bolts are fluted, machine work is top notch.

Re: Chambering a rifle - Reamer would bind??? It may also help to pre bore the chamber a bit, get rid of some of the material so the reamer has less to cut. I also run coolant through the bore from muzzle and out the chamber, helps flush chips out..

Re: Stainless Barrel on Blued action No, I have built several that way.

Re: Chamber question. Please help I think you will like the short throat in your chamber, my col with a 175smk is 2.79 with .010 jam. about the same as yours, Try loading .010,.015,.020 longer, Might show promise. The nice thing with a short throat is as the throat wears you can seat your...

Re: Build and Shoot Video Sweet! top notch stuff. Con Grads.

Re: New Lathe Help I have a Birmingham 13x40 same as the jet, its small enough to do barrels through the headstock and works out well. been a machinist for 30 years, not the smoothest machine that I ran, but it really will do a fine job on chambering and threading..