• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. P

    7mm SAW

    Hey guys, anyone tried 150gr LR Accubonds yet? Interested what speeds you managed with the 150s. Cheers
  2. P

    Accurate Mag Scratching Brass

    I got a pmag to work in my Tikka. I used a mill to machine down the plastic. Worked perfect and fed really good. Problem was the round sat up a tad to high. The bolt was rubbing on the next rounds brass. Rubbing a little to much for my liking. I need to buy another 5 rounder mag, going to go...
  3. P

    Accurate Mag Scratching Brass

    My accurate mag that came with my Manners stock fed like crap. It scratched the hell out of the brass, which I improved by polishing the feed lips. The spring in the 5 rounder also felt way too hard. I had to bend the spring so it didn't apply as much pressure to the rounds. Still didn't feel...
  4. P

    7mm SAW

    Would have loved to use Alpha brass. The cost to get here in Australia was just way to much to justify compared to Lapua. Even through the Alpha Dealer here.
  5. P

    7mm SAW

    Hey mate, What won't work exactly. Mine works? 7mmSaw Hornady Seater. I'm guessing older Coax presses have a smaller yoke or something do they?
  6. P

    7mm SAW

    How many rounds roughly before you start to see the carbon ring building up? This will be the first time ive used RL16.
  7. P

    7mm SAW

    Hey guys. Only just started playing with my SAW. It has the short throat chamber so I decided to try some Berger VLD 168gn Hunters as they have a short Base to Ogive. Rifle is a Tikka T3 running a 26" Proof barrel, 8 twist. Manners carbon prs stock with mini chassis. These results are with...
  8. P

    3D Printing for Reloading

    I'm currently on nightshift in Aus, printing a new 7mmSaw loading block while I work. Just keeping an eye on it ?
  9. P

    3D Printing for Reloading

    Great quality prints Ruebarb. Ive got a couple of ideas for my Forster Press and Forster Primer seater to draw up and print soon. I'll post them up when done.
  10. P

    3D Printing for Reloading

    Hey guys. Bit of an old thread but thought I'd add. Here are some of the things I've done. For peg board stuff, they work great for custom holders.
  11. P

    Rifle Scopes New high power Nightforce NX8?

    Ok great, thanks for that. So the NXS line is still a Japan/US built scope also. Somebody just told me he thought the new NXS scopes come out of China. I found that very hard to believe.
  12. P

    Rifle Scopes New high power Nightforce NX8?

    Hey guys, this may have been mentioned already, but where are these made/assembled? I just sold my NXS F1, pretty keen on one of these for a little more mag plus improved glass i would imagine. Cheers
  13. P

    New X-Ray Chassis from KRG-now shipping!

    Nice one. Can see myself using one for a possible build later this year.
  14. P

    Another AUSSIE query......

    Not suprised to read this. Took me a long, long time to recover my money. Debt collector, fair-trading australia... Nightmare i try to forget about.
  15. P

    Robotic Targets

    Not sure if this is the right section, but thought you guys might like these. A friend of a friend is working with this company as an engineer. I like how they scatter after one has been shot. http://www.youtube.com/watch?v=xOaIvq_-g3I&feature=plcp...
  16. P

    Gunsmithing Bottom metal that uses aics mags

    Re: Bottom metal that uses aics mags Here you go; http://www.lumleyarms.com/ and http://www.shooting.com.au/forum/index.p...382#entry106382 Check out the photos on that thread link about half way down. Look nicely finshed. There is another thread on shooting.com.au about them somewhere...
  17. P

    M40a5 project from Australia

    Re: M40a5 project from Australia Hey mate, Will make a few Aussies jealous when you get this build together. What smith are you going to use to do the work? Pete
  18. P

    Gunsmithing Any Solidworks CAD guys here?

    Re: Any Solidworks CAD guys here? Hey guys. Only briefly read though the posts, feeling to lazy tonight, but thought i'd add. Im a design mechanical draftman here in Australia. We use both Autocad and Inventor for 3d stuff. Havent had a chance to play with solid works yet. Clients love...
  19. P

    Price Surgeon 591-Australia

    Re: Price Surgeon 591-Australia "Well Ron should be importing more than one action" Thats exactly what i was thinking. Pete
  20. P

    Price Surgeon 591-Australia

    Re: Price Surgeon 591-Australia <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wild_Bill</div><div class="ubbcode-body">Hi We import Lawton actions and will not import just one action at a time because of the issues on the US export requirements. if a batch is...
Top Bottom
Back
Home
Forums
Merch
Alerts