Search results

Re: 300 Blackout - Random build I over-annealed all my brass and ruined it (d'oh) so I'm back to square 1 with having to make it from 5.56mm brass again. I determined that H4198 is not a good powder for supersonic loads, but it works fine for subsonics and fills the case nicely. I have...

Re: Past Present and Future Customers for Botach Tact. I have had three successful orders through Botach, and gotten some good pricing. I agree they don't tend to answer the phone, but I don't really care as long as my order shows up and is correct. I recently ordered 3 single-point sling...

Re: Sub sonic without can? With my 300 blackout subsonics it's about like shooting a 9mm pistol. Plenty loud, need muffs or your ears will ring. It is noticeably quieter than a full powered 308 load though, and as it should be since it's going 1/3 of the velocity and uses 1/4 of the powder.

Re: 300 Blackout - Random build Thanks for the advice, I'm really interested in the subsonic loadings for it so I guess I'll start with a couple pounds of A1680 and see where that gets me.

Re: 300 WSM + RL17 + 208 Amax LR thanks for the feedback, I'm having a lot of trouble figuring out what type of pressure signs this rifle is showing me. I sectioned a case today from one of the 66gr loads and it looked perfectly fine, but the primer crater/ dimple is severe enough that it...

Re: 300 Blackout - Random build I've got a metric shit-ton of Power Pistol, wonder if that could work for a subsonic load? Probably no hope of it cycling the bolt properly. I'll keep my eye out for the any of the powders you suggested Rsilvers, but so far I haven't seen anything around...

Re: 300 WSM + RL17 + 208 Amax I got the 208 Amax's up to 3,070 fps running some pretty hot loads, worked up to 66.0gr of RL-17 in my rifle which was definitely on the upper end of my comfort zone. Heavy (but not obscene) bolt lift and primer craters started showing up past about 65gr, the...

Re: 300 WSM + RL17 + 208 Amax OK, not sure I agree but it's Frank's forum so we play by his rules. I'll post the results when I get to shoot what I've loaded, the old fashioned way.

Re: 300 WSM + RL17 + 208 Amax I've loaded up a few hotter rounds, up to 66.0gr RL-17 to try out over the chrono, maybe after work tomorrow if I get off early enough. Projected, IF the load is safe, it should put it at about 2950 ft/s. Notably, at 66.0gr the case is almost completely full of...

Re: 300 Blackout - Random build Got this shooting today, no groups to post as I'm just trying to get the velocity worked up first. The only powder I had on hand was h4198, so that's what I attempted to use for both sub-sonics and super-sonic loads. Results were all pretty slow. Sub-sonic...

Re: Easy online dope - Now with Metric and mRads Also added a PDF generator for the site, output like attached. http://direkon.com/300wsm_DA.pdf

Re: Blackout or whisper I tried it out at the range today and everything I brought was pretty slow. For the 150gr sierra's the best velocity I could get was 1492 ft/s using 16.0gr of 4198. This was almost a compressed load, so it doesn't look very promising to get the velocity up to where I...

Re: 300 WSM + RL17 + 208 Amax Got some load data and velocities today... 208 A-Max, RL-17, 300WSM, Win Brass, CCI 250 primers Seated 0.020" off the lands Temperature: 65F in the shade Rifle: Remington 700 factory barrel, 24" long Powder, Velocity 59.5, 2615 ft/s 60.0, 2678 ft/s 60.5, 2709...

Re: Hearing protection in a tactical environment <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: caustic</div><div class="ubbcode-body">all I can say on this is that I CAN definitely notice a difference using only plugs or only muffs when compared to using both...

Re: Conceled Carry for the active life style. I run with my glock 19 in a Smart-Carry / Thunderwear and it works well for me. I rotate it around and away from my crotch so it almost hangs off my hip at 4:30-5:00 position to protect the jewels, and it conceals easily under my running short...

Re: Blackout or whisper Very nice shooting rsilvers. To the OP, I opted for the 300BLK for a number of reasons, most of which are listed above. The SAAMI specs were a huge deal to me and the reason that I've stayed away from the Whisper prior to now. I use a lot of open source software...

Re: Easy online dope - Now with Metric and mRads Another feature added for the Density Altitude users: There is now a link to a "Range Sheet" which runs the calc's at -2000 to 15000 feet DA and fits them on a single sheet out to 2000 yards. Only available in English / MOA units for now...

Re: need quick help- 308 load 168 Amax? you got one? 44gr 4064 + CCI #200 in WIN brass works for me, 2680 ft/s and ~1/2 MOA on a good day for me. I agree that 46.0gr 4064 may be too much for some rifles, it would be over max in mine. My rifle really really likes 42.0 gr 4064 but it's a bit...

Re: Bullet drop info needed M855 pushes 2950 fps out of my 20" and at 500 yards it's right at 12 moa (3.42 mils). With you wanting to go beyond that I would definitely NOT be comfortable operating in that range of my scope elevation, and would probably shim the base or rings to get the scope...

Anybody have some intel? I've found the same 10 posts which don't really satisfy my need to know, so am looking for any additional information. I've tried 63gr RL-17 already and it was showing pressure signs so I'm backing off to 58 and working up properly. I didn't chrono the 63gr load but...