Search results

I think the sheet should say bottom to top, left to right, rather than top to bottom. Everyone should know that already but there’s a ton of idiots among us.

As in same manufacturer, beam divergence, etc?

Doesn’t the display switch every few seconds from “listening” to the elapsed time count?

They make some special bolts that are push feed. Take your bolt out and see if you can get a case into the bolt head by hand. Zermatt is known for really good service, if you need it. @Zermatt Arms

Do you have a push feed bolt head or controlled round feed? From that picture it can’t be controlled round feed, and that would be a problem if it was.

I can tell you that the Comply (Comply is the brand, I think it is owned by Shure the microphone maker) tips fit the earbud tip, but they will come off in your ears also. But they’re comfortable till they come off.

https://www.farmandfleet.com/products/673973-mothers-california-gold-carnauba-car-wash-and-wax.html?blaintm_source=google&blaintm_medium=pla&gad_source=1&gclid=Cj0KCQjw2uiwBhCXARIsACMvIU0glEY8U-76rEuWnHmy8nXncr9T7KEFAOO89_W1eUSvjVT5R7OVRPIaAmedEALw_wcB&gclsrc=aw.ds

New brass is annealed before it gets to us. But yeah, I get there’s probably some wax or preservative on the brass also. There would be if you wet washed and had auto polish in the mixture too.

2 years later and this works fine, but I have to ask if it would be possible to not have all 10 still show up on the kestrel target card? I can remove the excess targets from a sector in the app, but if you export back to the kestrel the excess targets still show up with the zero range as the...

Just to clarify, the gray ops BR/Dasher 12 rd AW style magazine does not have the ability to add an extension. There is a a drop cover that looks like an extension, but it is for protection not an extension to add capacity. As to your question, I am not aware of an AW style magazine with an...

That’s the kind of weird (some might say dumb) shit that our government buys for $27,964.87 and it gets sold on govplanet 3 years later for $200.

I know you really hate 419, but the fat bastard is worse. I don’t like being anywhere near one.

The first issue isn’t that big of a problem since we would have a disposal record, either a form 3 or a form 4 with a 4473, not to mention the a/d record. The second issue, that one sucks.

There’s a starting serial number where all are aw cut. But I don’t know what it is. You should be able to tell really easily by looking at the feed ramp. Look at post #9 in this thread: https://www.snipershide.com/shooting/threads/question-for-aw-cut-impact-action-owners.6958376/

They’ll tell you to get a new extractor. I had this happen to me; I took my extractor off one of my bolts and put it on a buddy’s bolt to get him through a day. I stupidly ordered a PTG m16 style extractor and installed it, I had the same issues you’re talking about. That extractor just...

This sounds like an extractor issue. I can tell you 100% that not every m16 style extractor will fit right, so it is best to buy the $20 replacement extractor and spring direct from Impact. And if you’re going to do that, buy the ejector spring and plunger too.

I’m not talking about recommended practices, as you can see from my post. I’m talking about solving a problem so the man can shoot. He also said he doesn’t like peel washers, so he’s not going to like shims either.

You can, if the alignment on the threads and shoulder are ok. I get it, it isn’t ideal for center fire especially with weight. But if you don’t like the tbac peel washers, shims aren’t going to make you feel any better either.

Any crush washer for 5/8-24 should be good enough for this problem. The major diameter looks less then .625 in the photo, and that’s probably what they cut to or a thousandth or two under before threading. These are intriguing...

You’re missing a car, man.