Search results

Anybody ever order a LH twist bbl to take advantage of this? If so, could you tell the difference and who put the stick together. thanks, cd

Anybody give these a try? The .308 stuff advertises 190gr with a bc of .640 while the 210gr sports 0.730! Sounds like the perfect bullet for a 30 magnum.

The local Cabelas just got a train load of powder in; only letting each person pick up 2#/day though. Is the current production of powder consistent? Can remember a few decades ago; one had to work up their loads when changing powder lots. I'm using Retumbo in a 338lm......91.5gr behind 300gr...

Mine sucks...........it's loose and doesn't feed very well. Unless, the front part of the mag is held up tight. Still can't believe they get $175 for these stamped out accoutrements. The gun does shoot very well though ;)

Been shooting 215M primers in the 338lm. Noticed some have just a little purple paint on their firing side while others have blobs of the purple stuff. What is this paint like stuff and what does it do to the ignition sequence when it's varied from primer to primer. Just curious.......trying...

Been painstakingly reloading the 338lm to get the TIR below .002" Using Redding dies and competition shell holder (0.010 reduced bump), carbide expander ball, o-ring under the die lock ring/shell holder, size it, drop it down a bit (not touching the expander ball) then rotate 180 and size it...

Just finished Bryan Littzs' newest book......YGBSM Currently shooting both calibers; 300wm in a M86 and 338lm in a TRG42. 190smks in the 300 and 300scenars in the 338; there is basically zero comparison between the two. The 300 is a tack driver to 1200yds then turns into a shotgun while the...

The TRG42 is all black and looks a little off with the brown Titan-QD screwed on the end. Anybody paint one of these? If so; how did it turn out and what paint did you use? Been eye-balling the can of flat black high-temp paint used to touch up the BBQ.

Finally got the TRG42/338LM broke in; then added Titan-QD. One of my buddies brought some Cor-Bon 300gr subsonic rounds ($5+ each!), it made noise than the 10/22 with a sparrow. We pulled one apart; it appears to have Trail Boss powder in it (20.2 grains) but I can't be sure. Does anybody...

Getting a new build under way in 300 blackout. What barrel twist do folks use with a 240gr smk at 1000'/sec. Got a can on the end so I don't want any unstable spoiler rounds causing problems. thanks in advance, cd

I'm looking at getting a new rifle in 338 Lapua. Stuck with this caliber because I already have a Titan-QD can for it, the gun and brake/adapter never came in yet.......dealer screw up. Have always wanted a TRG-42 just because. It looks to be around $3K, any suggestions for putting the money...