• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Search results

  1. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Appreciate all the help, but yes I used the roll pin punches. Everything is aligned. The hold is just too damn shallow... Crazy I know. The guy I used was recommended a lot here, so it's not some Joe schmo. Pretty much told me to kick rocks at this point. Ok fine... Just wondering why it went...
  2. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    I did use a bit and nothing came out. Unless I'm not pushing hard enough and stuff is super compacted... Im at a aloss too
  3. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    It will. It's definitely the ejector not sitting into the bolt correctly.
  4. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Yeah I assumed that but I wanted to double check
  5. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Thtas what I was saying, yeah, its the same all the way down.
  6. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    When you said pin clearance relief, is the hole that is drilled in the bolt one size all way down? OR is it drill like this ( crude image, but hopefully you get it. ) Is the hole for the ejector cut all the same OD all the way down like in #1? Or is it like #2 and is the hole somewhat shaped...
  7. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Excuse my intellegence lol where is that located? Assuming you mean Serial itself? E649 is what it starts with. Asking just because mine doesnt have two letters - just what you see
  8. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Thanks. Mine is a 308 if that matters at all. The bolt functions within the gun fine in terms of movement/action etc. Just the Ejector button protrudes past the face of the bolt, thus not allowing the round to sit flush into the bolt/against the face.
  9. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    I dont... i honestly dont know much about these things. I took a few long range classes, learned how to shoot and I shoot for fun. I appreciate the help guys..
  10. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    This is getting unreal. So my specs on the ejector are damn near the same. Here is where it gets crazy. The hold is WAY smaller... 1.113" is what Im getting. I used a bright ass flashlight and looked in the ejector hole and it doenst look like there is anything in there at all. Im truly starting...
  11. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Cant... it never recesses past the bolt face.
  12. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Perfect. I'll check later on
  13. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Thats what Im thinking... The guy that did it is pretty much saying since I didnt shoot it since I got the bolt back, its up in the air. Well God strike me dead, it went out working and now it doesnt. The only thing that changed we fluting of the bolt that was tore down by them thus leading me...
  14. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    The extractor has always been there. Yes the cartridge seats properly into the bolt with w/the ejector removed. I did, nothing came out.
  15. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    I will do that tomorrow and report back
  16. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Yeah no dice on that... So I guess from here, any suggestions? Should I send the gun out to someone and have it checked? Im truly at a loss here.
  17. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Is this where the serial is located? If thats the case, I cant see it through the ceracoat on the bolt. This is a screenshot from a youtube video
  18. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Yes, very little if anything came out. I used some contact cleaner in the hole to see if anyhting came out, just very little brown residue
  19. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    As my luck would have it, I cannot locate the serial number on the bolt. I dont even know where to be looking at more closely either as again, I dont even see any traces of numbers.
  20. MrOneEyedBoh

    Help/Problem with Rem700 bolt ejector... Pictures inside.

    Will report back shortly...