Search results

Wow. $1500. You guys are in for treat when you see the Oslon black led in action. It has a square of illumination, not a circle. Using my spotter with the ir illumination switched off and the camera and 7"screen turned on. I can test my illuminators for how far they can throw. I have put that...

Here is your answer Wavelength: Visible pointer-635nm. IR pointer & IR illuminator 835nm. Google always gives the answers, just need to look for them. Cheers

I just googled the Dbal A2. It is a laser. I have no experience with lasers. I have never seen a laser in action. I believe that the area of illumination is very small. The illuminators I make cover a much larger area. Sorry I can not help you with an answer to your question. Cheers

Hi Guys I make Infra Red illuminators for night hunting. Started as a hobby has now turned into a business. The 850nm ir led of choice is the Oslon Black with the S at the end of the product number. It is the best thing there is right now. I make three different types of illuminators now...

Re: Tapping 1/2" UNF Action truing jig. Help All 12 holes are now tapped. It must be a good quality HSS tap, as it tapped the last hole with the same effort as the first. I reckon I will take the back plate and Jig to the local welder and have them weld it with the correct Nickel rods. I am...

Re: Tapping 1/2" UNF Action truing jig. Help <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hero's machine</div><div class="ubbcode-body">[ Test it with a magnet. If it is cast, machine a groove for the tube to sit in, use 7018 to weld it up. You can preheat...

Re: Tapping 1/2" UNF Action truing jig. Help <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 671RTO9513</div><div class="ubbcode-body">Tikka When I tap holes such as you've done on a jig like this, I do it right after drilling (assuming you have a rigid...

Re: Tapping 1/2" UNF Action truing jig. Help UkShooter. I should have said cast iron. When I was turning the diameter of the faceplate, it did not cut like steel, i.e like strands of steel spiralling from the cutting face. It was a black almost like a thick powder consistency., or maybe...

Re: Tapping 1/2" UNF Action truing jig. Help Well guys. I took the plunge and went out to my workshop and tapped three holes using a good oil. I have to say it was not hard. The tap cut with a 3/4 turn forward then back 1/4 turn. UK Shooter. I intended to use the tap to also cut threads for...

Re: Tapping 1/2" UNF Action truing jig. Help The tube drilled very easy with a 29/64 MT 1 new drill. I lubricated all the way through the drilling process on each hole. I was surprised how easy it drilled. I have read horror stories regarding working with stainless. I got my hands on two...

I have got the point where I have my 12 holes drilled in my action truing jig and I am ready to tap the holes. I have recessed a faceplate to accept the 316 stainless steel tube. I intend to weld the tube to the faceplate. The tube has a 3/4" wall thickness. I would be very grateful for any...

Re: Hawkeye borscope angled eyepiece. Worth it? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hired Gun</div><div class="ubbcode-body">For a Hawkeye?? Mine was near $1700. My eyepiece alone was $250. I would like to see some pictures of your "loot" once you...

Re: D1-4 mounted directly to action jig? Great info. Thank you. My Tikka action has a built in recoil lug, I had not given this much thought. Ian

Re: D1-4 mounted directly to action jig? Can someone please advise on which blank from the below list would be the best one to make my jig from. I am hoping to have a bit off cut from the blank to make a spider which will be fitted to another D1-4 faceplate. pipe 1 105mm od x 50mm nominal...

Re: Hawkeye borscope angled eyepiece. Worth it? I feel a bit stupid relating to the question above 90 and 45 degree. I worked it out pretty quick. I purchased the Hawkeye scope which is the smaller tube version with the 45 Degree eye piece. I pick it up tomorrow. I got lucky with the price...

Re: Hawkeye borscope angled eyepiece. Worth it? A bit off topic but can someone tell me the difference between the 90 and the 45 degree scope mirror. I am thinking that it will relate to how much angle of the image you will see. I also noted that on the Hawkeye video promo there is images...

Re: D1-4 mounted directly to action jig? I know it will have been answered before but what is the length of the Jig and is 4" the minimum that can be used and still be able to get the bolt slot incorporated into the jig.

Re: Opening up bolt face Is it possible to buy a replacement extractor that would mach the new calibre, to replace the existing extractor. Thanks for your input.

I would like some help on what the procedure is to open up a bolt face with a Sako extractor from .308 to 7mmSAUM. The Sako extractor is correctly positioned for the .308, How do you then get the correct set up for the new calibre. I am thinking the Sako extractor has to have a shim or...

Re: D1-4 mounted directly to action jig? Am I right in thinking that you should mill a slot on the opposite side of the slot for the bolt handle. Would this not make the jig more balanced when then the lathe is running at faster speeds. I am sure I read where someone was thinking of putting...