quickload

Can some kind soul with Quickload, please, calculate some approximate chamber pressure for some potential Trail Boss loads to shoot out of 5.56 5.5" SIG MCX Rattler? Bullets: Speer 1029 Varmint .224 50gr JSP & Speer 1023 Varmint .224 45gr JSP Loads for each bullet: 4,5,6 & 7gr of Trail Boss...

Looking to load the Hornady 110 vmax in my .308 AE 24 inch barrel. I've just started to explore Quickload (computer program), am i right in thinking 47 grains of IMR4895 is good starting load? I've even filled the case with water and inputted that into QL to give myself the best chance of...

im loading for my 22-250 and trying to figure out what the difference between 22-250 CIP and 22-250 SAAMI thanks guys!

If anyone is interested there is a group buy going on right now for Quickload and Quicktarget software. It is a very well put together program with many options. Here is a complete review on its features. http://www.6mmbr.com/Quickload.html here is a very concise rundown...

55gr FMJ 27.5gr Reloader 10x Fired from 16" 1:8 AR barrel? Thx.

Can someone tell me if I can get a 100% powder burn out of a 26" barrel with Reloader 25 behind a 300 grain SMK in .338 Lapua? If not, what powders would give me a full burn or close to a full burn in this barrel? This help would be greatly appreciated.

I have a couple of 300 Winchester Mag loads I would like to run through Quickload to see where they fall on the accuracy nodes. Since I do not own Quickload, I was wondering if someone would run them for a fee? It will give me a chance to see if I want to purchase Quickload in the future.

Anybody here that uses N150 ever ran the numbers through QuickLoad? I'm having a tough time making things match up - without jacking up the Ba rate 8-10% (i.e. quite a bit). And then the OBT node doesn't match up worth a darn... The initial projected velocities from QL for a .308 Win...

Just purchased QuickLoad 3.5 and I'm trying to get it configured to match real world results. I've read the info on http://www.the-long-family.com/optimal%20barrel%20time.htm and I'm using actual measured values for my 'Grains H2O', 'Case Length', 'Cartridge Length' and 'Barrel Length' values...