sako

  1. E

    New here

    Just bought a Sako Trg 22 with 300 rnds through it. Always wanted one of these since the early 2000’s. Just mounted my ZCO 5x27 off my AR10. Rings are too high for my taste at 1.5”. Have the Spuhr Trg dovetails coming from Europtic. Bought the dovetail because I don’t like how the Trg rail hangs...
  2. L

    Sako TRG 22 Optic Rail

    I’ve been a member for a while, but never really post. I just recently purchased a Sako TRG 22 in 6.5 Creedmoor and don’t really like how the factory optic rail extends passed the front of the action. Is it possible to move it rearward so it sits flush (there’s room behind it for what I assume...
  3. JustAnOldCoot

    Sako L61R Action - Savage Barrel Re-threaded to Sako???

    Hi Folks, I need to remove the worn out Pacnor 7mmx300 Weatherby barrel on my Sako L61R action. I was looking to move to 300 PRC to give the cartridge a whirl on a budget...is it possible for me to have my Savage barrel re-threaded to fit my Sako action? Seems like the Save barrels are 1.055...
  4. Every Day Gun Guy

    Firearms SAKO S20 PRECISION RIFLES .243 Win|6.5 Creed|7mm rem Mag|.300 WIN Mag

    SAKO S20 PRECISION RIFLES NOW AT EVERY DAY GUN GUY!!! CLICK HERE OR THE PIC BELOW TO BUY YOURS TODAY REMEMBER...WE ALSO SHIP TO YOUR LOCAL FFL www.everydaygunguy.com POPULAR BRANDS THAT WE OFFER... PLUS MANY MORE @ EVERY DAY GUN GUY!!! Anderson FN Lancer Sig Sauer Armscor Franklin...
  5. Every Day Gun Guy

    Firearms SAKO S20 PRECISION RIFLES .243 Win|6.5 Creed|7mm rem Mag|.300 WIN Mag

    SAKO S20 PRECISION RIFLES NOW AT EVERY DAY GUN GUY!!! CLICK HERE OR THE PIC BELOW TO BUY YOURS TODAY REMEMBER...WE ALSO SHIP TO YOUR LOCAL FFL www.everydaygunguy.com POPULAR BRANDS THAT WE OFFER... PLUS MANY MORE @ EVERY DAY GUN GUY!!! Anderson FN Lancer Sig Sauer Armscor Franklin...
  6. flatlandsurvival

    SOLD WTS Sako TRG 22 308 Win

    Up for consideration is my Sako TRG model 22 in 308 Winchester. I have owned this since new and have 108 rounds on the barrel. Comes with everything you see on the rifle as well as the original box. Here's a link should you need more info on this firearm...
  7. GoferDog

    Sako p94s stock question

    Gday guys, I would like to know if the p94 action will work in a stock with the Quad/Finnfire II inlet. The reason for this is that McMillan have discontinued in letting for the p94 and to have it done here is proving to be difficult. Would really like to save the varmint stock. Thanks (I...
  8. L

    Firearms Sako TRG 22/Extras $2750

    First post so here goes. Please let me know if I should change anything, or if I'm doing it wrong. WTS Sako TRG 22 Classic .308 Previous owner told me he put 600 rounds on it, and I've put 180. He also had the barrel shortened and threaded for suppressor. Bought it to get into reloading, but...
  9. Providentarms

    Firearms Sako! TRG42 A1 in 338 LM

    NIB & RTS asking $7499
  10. DeSnifter

    Accessories SOLD - SAKO TRG 22 FACTORY STOCK, BIPOD, MUZZLE BRAKE, MAGAZINE

    ------------------------------------------------------------------- SOLD TO GBMARYLAND ------------------------------------------------------------ Looking to sell the remaining parts I have from an old Sako TRG 22 build. All parts are factory original in used condition. Additional photos...
  11. OldDawg

    TRG-s m995

    I have a Sako m995 in 7mm rem mag. Bought it new way back when. Can I use this action and rebarrel for 300 PRC ? I would be looking at a different stock also. Haven’t researched what’s available for this rifle, options may be limited. Any suggestions on a stock would be appreciated. Weight is...
  12. R

    adaptor between Sako optilock and picatinny

    I have a Sako TRG-42 with a 3-ring mount for my Schmidt&Bender 3-27. I also own a Sabatti STR 6.5CM (purchased recently) and I want to mount the same scope on this rifle. In my ideal world, I could take the 3-ring mount from the TRG and put it on the STR with pcatinny. So I probably need an...
  13. tomCTFA

    Firearms Auction: TacOps Vectronix M40 n More from member

    Everyone, I would like to invite you all to view an auction with several nice pieces in it from one of our own members. Check out lots 61, 64, 65, 66, 68, 69, 70 that you guys should find particularly interesting. Multiple ways to bid. Here is the link to the main auction page from which you can...
  14. tomCTFA

    Auction: TacOps Vectronix M40 n More from member

    Everyone, I would like to invite you all to view an auction with several nice pieces in it from one of our own members. Check out lots 61, 64, 65, 66, 68, 69, 70 that you guys should find particularly interesting. Multiple ways to bid. Here is the link to the main auction page from which you can...
  15. fmillik

    Gunsmithing Sako 85 and Tikka Prefit

    I‘m about 1200 rounds into Sako 85 260 Rem, and I was wondering if anyone knew about doing a rebarrel on a Sako 85. Can I use a Tikka prefit or is this something I should just send out to a smith when the time comes? (barrel is still shooting great, but at the rate I am going the barrel will...
  16. L

    Help with finding right bi-pod mount system.

    Hello all, I have a Sako TRG 22a1 and I'm wanting to mount the Sako factory bipod to the rifle. However, I'm not familiar with the mounting system that the bipod is using and I can't seem to find any help regarding the TRG, most forum results are the old polymer stock and I don't believe that...
  17. proftwo

    sold

    sold
  18. B

    Range Report 147gr ELD-M Long Range Test

    I managed to get out the other day with my .260 and test my new 147gr ELD-M load at longer range; initial results are promising... http://youtu.be/mZvjcMGA33w
  19. K

    Gunsmithing Saki

    I have a sako L61R in 7mm . A ken jar trigger and a Douglas star gauge semi bull @ 9/1 all mounter in a fajun stock and want to place them in a quality fully adjustable stock, I want to shoot 3650 with this unit . Does the sako action match a Remington 700???
  20. aqualung

    Gunsmithing Sako quandry

    Hi Guys, I am having a .260Rem built on a Sako 591 action. Talking to my Smith, all the metal work should be done in the next couple weeks. However, I intend to fit the barreled action to the stock myself, doing the bedding work myself saves a considerable ammount of money. (My Smith...