sako

Just got the first unfinished proto-type from the shop. I'm having them move the front of the loop closer to the receiver screw so it is more like the factory, that way you have a little more room if wearing gloves. The special tool will be here soon so the outside of the guard will have a...

Does the Sako Quad in the synthetic stock have the same removeable bottom metal as the wood stock, or is the trigger guard and such molded as part of the stock? It's too late to call Beretta and I'm trying to answer an e-mail. Thanks, Dick

Does the Sako Quads with the synthetic stocks have the same removeable bottom metal as the wood stocks, or is the tigger guard and such molded as part of the stock? We've never had one of the synthetic stocks in here and it's too late to call Beretta, and I'm trying to answer an e-mail about...

Hi, I just got my TRG 22 in today. I want to remove the sling assembly that is along the side of the barrel. My question is, did anyone else try removing this piece of metal from the rail. I was able to finally get one of the two screws loose, but the other one is really on there. When I...

with news that accuracy international is going to produce an aw in a lefty, i was wondering if sako will follow suit with the trg22. maybe its just wishful thinking on my part.

I have a Sako 270 WSM, had the rifle for about 5 or 6 years. Finally took it out to shoot with handloads and factory. It will put first two shots into almost one hole @ 100 yaards. Then it starts walking all over. It is stainless with synthetic stock. On my 700, I torque front screw to 60 inch...

Nothing fancy, just my brand-new TRG-22 right after coming out of the box.

From time to time, I think of picking up a Sako TRG 42 in a magnum caliber since there is no denying they are one of the best values for out-of-the box accuracy available. But what is up the prices of their accessories? $450 for a bipod? $200 for a magazine? $450 for scope ring base? Are...

After trading off a TRG 42 a while back, I have been wanting another Sako. The build quality amazed me for a factory rifle and the trigger is as nice as any I have used. I got my hands on another TRG, a 308 this time, via another trade, and am wondering who else is shooting a TRG22. Am also...

Anyone make an AI type stock for the Sako Quad?

I am deciding what to do for a .338 Lapua. In reading about the TRG I have heard that the twist rate isn't fast enough to stabilize the 300 gr. smk. Is this true? I have heard that the solutions available for mounting a 34mm tubed scope are unreliable and fragile. How accurate is this? How...

Please tell me the LOWEST price that you have seen a TRG-42 go for in the past 6 months or so. If anyone knows the approximate dealer pricing..that would be helpful too.. I am talking of NEW Rifle prices only. Thanks

Here is a couple of pictures of the Sako TRG rail installed (TRGR (pronounced "trigger" Kit, Part number BT29) shown with our BT12-QK monopod. These are in production and will be available some time later. I haven't the numbers for the cost but it will be agreeable to most. We also have a...

My Sako shoots fantastic however I've been having a little trouble as of late. The Trigger mechanism was binding up so I sent it off to Beretta in MD and they promptly replaced it. Very good service. Now something else odd is going on. It only happens when you rack the bolt hard / fast...The...

Good morning All, I was hoping someone could steer me in the right direction. I am developing loads for my Sako 30-06 in an attempt to make it as accurate as possible. It has a 1 in 11 twist. As I understand it, all individual rifles have thier own "sweet spot" or "happy load". I have just...

Shot the FF this morning in the backyard. It was only 50yds. I shot over the Oehler and averaged 1033fps. 70 degrees and no wind. I pilar bedded it and mounted a MK 4 (4.5-14x-40mm) using a RT 20moa rail and Warne rings. The trigger breaks clean at 14oz. Yes, it passed the "bounce test")...

i noticed i wasnt the only trg 42 owner who wanted to be able to adjust the resistance/tension in the cant of the sako bipod so it was not too loose when shooting prone [especially if the ground is not level with the target so you need to tilt the cant]. so i thought i'd post this info. a buddy...

Would the Sako TRG rifles be a more attractive option as a high end production rifle if there were affordable aftermarket parts? Parts including a bipod adapter for example versapod, picatinny rail/scope rings and muzzle breaks?

I've been trying to creep up on max loading 175SMKs and it's been a long creep. I guess because I'm able to load the OAL so long that it's a bit different than my other rifles. I tried the search but didn't dig anything up. Anyone care to share what they are using?

I know OAL's are different for every gun and bullet for that gun, but I am working up some initial loads for my new rifle and I would like to know if I am in the ballpark. I have used a hornady OAL guage and to put the bullet near the lands it will not fit in my magazines. Therefore I have...