1050 vs Mark 7

[1jonathan1994]

So both are awesome machines, but for only about 3000 rounds a year I have a hard time justifying anything above a 750.
Is the Mark 7 $1000 better than a 1050? I know a lot of happy 1050 and even 650 fans.
I will have a case feeder and Mr bullet feeder on what ever I buy.
9
45
223
308
But large primer stuff is low volume and will stay on the 550.

 

[pmclaine]

My biggest issue with my 1050 is the limited work zone.

Cant run a .308 Forster Match seating die because the sliding insert will hit the bullet/case.

Even a bigger problem with 30-06. Your pretty much limited to Dillon dies on the 30-06 loading.

Otherwise......it drops pistol rounds very fast, on board swaging is fantastic, brass prep is really fast with the rapid trim.

 

[1jonathan1994]

My biggest issue with my 1050 is the limited work zone.

Cant run a .308 Forster Match seating die because the sliding insert will hit the bullet/case.

Even a bigger problem with 30-06. Your pretty much limited to Dillon dies on the 30-06 loading.

Otherwise......it drops pistol rounds very fast, on board swaging is fantastic, brass prep is really fast with the rapid trim.

1050 or 1050 super?

 

[pmclaine]

1050 or 1050 super?

Super 1050.