16” 223 ackley sporting new mpa csr chassis
- Thread starter DrDeath
- Start date
16” 223 ackley sporting new mpa csr chassis
That’s where I am. I just want one. I like 7mm anything and I think it would be a fun caliber. My 6.5 is as good as it gets. I had SAC build it and it’s awesome. When I put a 7” can on it, it’s cumbersom to tote around the woods. This would be for hunting whitetail and those situations when I’m in the thick stuff. I can keep the 6.5 for stand hunting with wide open fields. I have two 6.5’s so I figured I’d do something different. Had a 300 WSM built and regretted not going 7-300 WSM, until it was done. Had that one built on a long action and shooting 215’s and it’s bad ass. Still have the 7mm bug though. So I like the idea of a shorty. Just can’t find much on a shorty in 7mm-08.
16.5 inch RPR 6creed. Lightened it up a lot. Room for more weight savings.
Only put gen 2 razor on for pics. Will be running a shorty scope on it in the future.
Shorty rifles are my obsession right now.
Only put gen 2 razor on for pics. Will be running a shorty scope on it in the future.
Shorty rifles are my obsession right now.
Do any of you have a pet load for 6mm Creedmore in short barrel?
Here is mine, 16" 308 rem700lh it's super handy.
@PBWalsh
It's not a really clean rifle, a little crude because I did most of the work myself ( some things I will pay someone next time )
Base rifle is a Remington 700 varmint lh
The bolt is fluted by lri, and threaded by myself with a badger ordnance knob
The barrel was originally shortened by Redhawk rifles to 20" and then a second time to 16" by accurate ordnance
The stock is a hs precision, kmw cheekrise done myself, it has an arcade plate so I can mount it directly to the tripod, some flush cups.
The suppressor is a gemtech tracker
It's not a really clean rifle, a little crude because I did most of the work myself ( some things I will pay someone next time )
Base rifle is a Remington 700 varmint lh
The bolt is fluted by lri, and threaded by myself with a badger ordnance knob
The barrel was originally shortened by Redhawk rifles to 20" and then a second time to 16" by accurate ordnance
The stock is a hs precision, kmw cheekrise done myself, it has an arcade plate so I can mount it directly to the tripod, some flush cups.
The suppressor is a gemtech tracker
@ Sid
I love it. Clean, simple, useful. I'm ignorant of many things, suppressors included. Did you elect to direct thread that suppressor? What is the glass?
I'm off to peruse the suppressor threads...
I love it. Clean, simple, useful. I'm ignorant of many things, suppressors included. Did you elect to direct thread that suppressor? What is the glass?
I'm off to peruse the suppressor threads...
The glass is swfa 12-44 not great but works good for this rifle.
This is my first suppressor it's a direct threaded one, I thought I would only use it for hunting but I even used it for competition, I have a silencerco Omega, and a yhm suppressor in NFA jail so I get to see what I like more, direct threaded or something else.
Next thing I will add to the rifle is a piccatiny rail for the bipod and possibly night vision mount, but I have time with that since I can't own night vision yet since I have a green card and are not a us citizen yet.. 3 more years
Last edited:
Around there. I think it might be closer to 16.25 but I'm not entirely sure. I told my gunsmith to cut it as short as he legally can.
Also new pic since I found out my rings were too high.
Also new pic since I found out my rings were too high.
Here is my Frankenstein rifle, shorty barrel and shorty scope. Just got this back from SAC after having a tweak or two done to bring it all together. 16.25" Kreiger barrel, Surgeon action, etc.
Nice. I've been wanting to do a very similar build for awhile now. Hopefully I'll have the suppressor and Manners stock by the end of the year.
that was just a bench shot. ill take some better pics when i get it out in the country and start sending rounds through it. its a pieced together gun, out of used parts of all sorts, but i do enjoy how it came together. The barrel fluting was almost an afterthought, as i was having Mark Gordon bed the action and modify the McMillan for the Surgeon bolt release bumpout. i think it took a little bit off the MTU contour. told him to leave the flutes raw and not coat them. Everything on the gun is a different color of black, green, camo, tan, etc.
Updated:
rifleshooter.com
6.5 Creedmoor- Effects of Barrel Length on Velocity 2019
“We do it right because we do it twice!”Greg Wagner, Wildlife Photographer Background The 6.5 Creedmoor has become one of the most popular center-fire cartridges in the precision rifle …
rifleshooter.com Last edited:
I spit my coffee out on this one... it's soo funny to hear "weight savings" and then see the razor....
I only put it on for pics to see how silly it was haha.
It will eventually have an Eotech Vudu 5-25 or some shorty scope on top of it.
really nice man, which stock is that? EH4?
I just got done with this 16.5” Tikka T3 in 6 Creedmoor with a Proof Research barrel and Manners CS Stock. I haven’t had a chance to shoot it yet because I just got it back on Tuesday.
Here is my Curtis Vector with an 18inch Proof 6.5CM and an Elite Manners T6. 
Also curious as I'm considering the same setup.
Bergara is offering an 18" Creedmoor now. If I had not already started gathering the parts for a R700 build I'd be going this route.
www.eurooptic.com
Bergara B-14 Ridge SP (Special Purpose Short Bbl) 6.5 Creedmoor Synthetic Stock 18" Rifle B14S512
Bergara B-14 Ridge Rifle SP (Special Purpose Short Barrel) 6.5 Creedmoor Synthetic Stock 18" B14S512 For Sale
I have always loved the looks of the TacOps rifle. I had a couple different parts laying around the house so this is what I came up with, though I still have some work to go.
GAP barreled action cut to 18 inches
Manners folder
Black ops bottom metal
Defiance EFR
And slapped some MarineTex on it.
GAP barreled action cut to 18 inches
Manners folder
Black ops bottom metal
Defiance EFR
And slapped some MarineTex on it.
Attachments
Last edited:
I can weigh when I get home. No barrel swap. Just had a local smith cut down and rethread
Thnks my friend! She’s gonna be handy for sure. It’s only 28 inches folded which is a plus.
Here’s my contribution
Gradous built 16.5” 6.5x47 Lapua impact action.
Gradous built 16.5” 6.5x47 Lapua impact action.
A young gunsmith in Tucson put this together for me earlier this year. 300 blackout, MPA chassis, Stolle Atlas Kelby action, Trigger Tech trigger, 16” Kriger Barrell. Ended up naming it “Spanky” after kidding around while it was being built and found that the gunsmith was nicknamed Spanky when he was younger. The can is a TBAC Ultra 5CH with a CB muzzle brake.
I am sure this was debated somewhere in here... but as a non-reloader: 16" .308 or 6.5CM!?
Pick your poison. Both calibers have great factory ammo options. I’ve run short barrels in both and don’t personally have a preference one way or another.
Beautiful gun.. I ended up ordering a 16" 6.5CM barrel for my DT A1. I can't wait for it to come in and finally take advantage of this short platform.
I have a 16” 6.5x47 shorty barrel. I’m getting 2825 FPS with 130 berg hyb. On top of 29g of Varget suppressed with an Ulta 7 TBAC. Just a great platform to run short barrels.
Attachments
Last edited:
Painless300———“I have a 16” 6.5x47 shorty barrel. I’m getting 2825 FPS with 130 berg hyb. On top of 29 gr of Varget suppressed with an Ulta 7 TBAC. Just a great platform to run short barrels.”
That’s awesome. I am using the good old 44gr Varget with 175’s. Getting 2615 FPS. Want to load up some 178 eld-x for hunting this year.
Painless who did your barrel work? I like that spiral fluting! I want to get a 16” 6.5 (something) by the end of the year. I haven’t decided which 6.5 I want to get yet.[/QUOTE][/QUOTE]
That’s awesome. I am using the good old 44gr Varget with 175’s. Getting 2615 FPS. Want to load up some 178 eld-x for hunting this year.
Painless who did your barrel work? I like that spiral fluting! I want to get a 16” 6.5 (something) by the end of the year. I haven’t decided which 6.5 I want to get yet.[/QUOTE][/QUOTE]
Last edited:
[/QUOTE]
[/QUOTE]
Mark at SAC fixed me up, I was trying put that beast on a diet. He cut almost a half pound in just the fluting.
So I went back to a .308win for this one.
18” without the brake, shoots .5” groups.
This scope may give way to a smaller one soon, but for now it’ll do.
18” without the brake, shoots .5” groups.
This scope may give way to a smaller one soon, but for now it’ll do.
I have to ask how? Tight bore? Different climate? That's nearly what i was running out of my main gun with 130gr Hybrids over 37.3gr of Varget. Currently running 37.6gr of varget with 130gr normas at 2840. I'll be going back to the ELD after the Norma runs out but even then my 18" 6.5x47 saw 2715fps out of 130gr ELD-M with 37.3gr of varget. Did you mean 39gr of varget?
Sorry, yes 39g. Fat fingers on a iPhone! I’ll edit my post and add a pic of the last 5 round group. Love this little barrel!
Here’s my latest shorty. It’s an 18” 6.5 Creedmoor sitting in a McMillan A5
I'm only getting 2830 out of my 24" 6.5 creed with 42.7gr of 4350.
Is the with 140/143g? In my experience I get much better velocity with Varget with the lighter 130g than 4350, its a little faster burning. 4350 is better suited for the heavies.
