I only have 200 yards for load development at my home rang what is the most efficient way to perform a new load development at that range. I read the OCW test but I cannot understand what to look for if there is any method that I can perform at 200 yards please help me out. I also read about the latter test which is more simpler to understand but I don’t have the range to performer the test. I understand that I am suppose to look for a powder charge that gives me the least amount of vertical stringing but how do I accomplish that at 200 yards My new rifle is a 260 Remington with a 1-8 twist bartline barrel. I like to shoot the 142 SMK bullets. My reloading powder is H4350 and my bullet is touching the ogive at 2.880 COAL. I prepped all my brass but having a hard time figuring out testing for the load at my local club at 200 yards.
260 rem load development 200 yards
- Thread starter 40x
- Start date
Re: 260 rem load development 200 yards
Dennis, at 200 yrds I'd stick with the OCW test heres a linky with some pics and what to look for on the targets
http://www.longrangehunting.com/forums/f28/ocw-vs-ladder-test-significance-scatter-group-15258/
Dennis, at 200 yrds I'd stick with the OCW test heres a linky with some pics and what to look for on the targets
http://www.longrangehunting.com/forums/f28/ocw-vs-ladder-test-significance-scatter-group-15258/
