.300 WM Pet Loads

[Alabusa]

Anyone want to share a pet load using H1000 and 190gr VLDs?

I understand the need to start low and work up with all loads. I am more just looking for areas to pay special attention to. I have test loads from 75gr to 79 gr loaded in .5gr increments.

 

[UT-LRshooter]

I am currently experimenting with the 210 VLD’s I’m curious to see where you find pressure signs. What O.A.L. are you running?

 

[Alabusa]

I am running 3.600 col. 2.910 cbto. The only sign up to 79 grains is slightly flattened primers. No cratering and no ejector marks. I have not went past 79 grains and have settled on 77.8 grains at 2960 fps. Now I am working on seating depth to tighten up the group.

 

[Alabusa]

I ended up at 77.8gr of H1000 with a .040 jump on 190VLDS @ 2950 fps