I'm fixing to swap barrels on my Rem 700. Currently I have a 243, but as soon as I find a take off 308 barrel I am going to swap barrels. I'm interested in loading Bergers 168gr VLD or Hornady Amax. This rifle will be used for deer hunting too. I read that the VLDs are sensitive to seating depth. I was wondering if anyone had any experience with either of these bullets. Any information is appreciated.
-
Having trouble using the site?
Contact support
308 Berger VLD & Amax
- Thread starter awganr
- Start date
Re: 308 Berger VLD & Amax
If hollow point bullets didn't get smooshed up during shipment and handling, they'd be my choice.
But, I always seem to get unexplainable flyers with hollow points, because the meplate is bent from shipping on some bullets. So, I've switched to Hornady Amax bullets. The point is the same on every one. Flyers are no longer a problem (attributable to bullets, anyway).
If hollow point bullets didn't get smooshed up during shipment and handling, they'd be my choice.
But, I always seem to get unexplainable flyers with hollow points, because the meplate is bent from shipping on some bullets. So, I've switched to Hornady Amax bullets. The point is the same on every one. Flyers are no longer a problem (attributable to bullets, anyway).
Re: 308 Berger VLD & Amax
In both 308's (one factory and one full custom) neither was seating depth sensitive with berger 168 vld.
I shoot the hunting VLD and the Target Hybrids and they are both hammers. I am running them behind 47 grains of varget and am 8 moa to 475 yards (My range distance).
Just yesterday the 168 hybrid printed a little under a 1.5 inch group at 475 yards.
In both 308's (one factory and one full custom) neither was seating depth sensitive with berger 168 vld.
I shoot the hunting VLD and the Target Hybrids and they are both hammers. I am running them behind 47 grains of varget and am 8 moa to 475 yards (My range distance).
Just yesterday the 168 hybrid printed a little under a 1.5 inch group at 475 yards.
Re: 308 Berger VLD & Amax
Usually the VLD bullets do not jump as well as the SMK, and that is how it has been for me. I load the 175 VLD closer to the lands than I would bother to with the Matchking and they do seem to do better.
I will say that the AMAX has been pretty tolerant of seating depth and has performed very well on targets and game (deer) at quite a bit lower cost compared to the VLD style bullets. Range has been limited to just over 500 yards here though. Longer ranges may show a bit more of a gap.
Usually the VLD bullets do not jump as well as the SMK, and that is how it has been for me. I load the 175 VLD closer to the lands than I would bother to with the Matchking and they do seem to do better.
I will say that the AMAX has been pretty tolerant of seating depth and has performed very well on targets and game (deer) at quite a bit lower cost compared to the VLD style bullets. Range has been limited to just over 500 yards here though. Longer ranges may show a bit more of a gap.
Re: 308 Berger VLD & Amax
I shot for the first time some 185 Berger hybrids out of my 308 at 1000 this past weekend at .005 off the lands. I'm hooked.
I shot for the first time some 185 Berger hybrids out of my 308 at 1000 this past weekend at .005 off the lands. I'm hooked.
Re: 308 Berger VLD & Amax
I've had better accuracy with the amaxs, but I am able to get .8 moa at 550 yards with the Berger. They ( Berger ) are HELL on game. In my .300 win mag I shoot the 210's 2907 fps at the muzzle. They are tack drivers. I shot 4 deer over 400 yards and they never heard a thing. Hit em so hard it sounded like a boat paddle whacking them. One at 542 yards had her shoulder and leg broke on the OTHER side of the entrance hole.
I've had better accuracy with the amaxs, but I am able to get .8 moa at 550 yards with the Berger. They ( Berger ) are HELL on game. In my .300 win mag I shoot the 210's 2907 fps at the muzzle. They are tack drivers. I shot 4 deer over 400 yards and they never heard a thing. Hit em so hard it sounded like a boat paddle whacking them. One at 542 yards had her shoulder and leg broke on the OTHER side of the entrance hole.
Re: 308 Berger VLD & Amax
I'm currently shooting the 168gr A-Max with RL 15 and H-4895 and had good resulst at 100 to 500yards. I shoot them out of a 16 1/4 Barrel SCAR and I'm not a great shot but at 100 Today got .888 5 shot group and velocity is around 2,500fps. I have yet to shoot something but I hear they don't leave a huge exit hole but once inside the body cavity the explode shrapnel all over. I have also heard that Berger is the same way they penetrate 2inches and frag.
I'm currently shooting the 168gr A-Max with RL 15 and H-4895 and had good resulst at 100 to 500yards. I shoot them out of a 16 1/4 Barrel SCAR and I'm not a great shot but at 100 Today got .888 5 shot group and velocity is around 2,500fps. I have yet to shoot something but I hear they don't leave a huge exit hole but once inside the body cavity the explode shrapnel all over. I have also heard that Berger is the same way they penetrate 2inches and frag.
Re: 308 Berger VLD & Amax
I shoot both 168’s in my 308's and have hunted with the Berger. Both work fine and are factory mag friendly.
My hunting post with the Berger with detail pics http://www.snipershide.com/forum/ubbthre...789#Post2888789
I shoot both 168’s in my 308's and have hunted with the Berger. Both work fine and are factory mag friendly.
My hunting post with the Berger with detail pics http://www.snipershide.com/forum/ubbthre...789#Post2888789
