• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

.308 ELD, ELD-X, TMK loads

Seeking_Coyotes

Private
Full Member
Minuteman
May 11, 2017
64
16
Getting my son a Tikka T3x ctr type rifle with a 1:11 twist, 20" barrel, etc. I reload a ton but not for this caliber. Picked him up some Laupa brass and ELD bullets in 150 grain, ELD-X 173, and Sierra Tipped Match King bullets in 168. I'd appreciate powders and load suggestions for accuracy, etc. I'm partial to Varget but not sure how that would do in a .308 Win. Thanks in advance. :alien:
 
I ask the same question a couple days ago and didn't get much of an answer. I'm going to start at 43 grains of Varget and work up to 45 with the 178 ELDX.
 
Varget and RL15 about 42 with 175 class and about 44 with 168 class in Laupua brass. Work up to those in Lapua brass. In some of the thinner brass you might get to 45 with 175 an 46 with 168
 
Varget runs good in my 308 45 grains in win brass and 175 smks or 43.3 grains in lapua.might be a little hot for some rifles Friend of mine is shooting the 155 tmk with a starting load around 45 gr varget and is getting good results. Have not tried the 168 tmk.
 
I run IMR 4064 - 42.0 gr, 178 eldx, cci 200 in LC standard and LC Match brass. 20” Savage (soon to be 16.5”). Don’t have a chrono but it’s been sub moa for me.
 
I just switch to 178 ELD-Ms from SMK’s. I found 2 loads with Varget, Lapua brass, and Fed210M primers. 42.9, and 43.8. 42.9 is giving me 2705 and 43.8 is giving me 2750 in a 24” Bartlein. Very forgiving bullets. 42.8-43 was a node and 43.6-43.9 wa the other.