Looking to see what reamer the smiths on here are using for a good GMM/BH chamber. I would like to have a reamer that is a good choice for factory ammo as well as reloads.
thanks R
thanks R
Gunsmithing 308 reamer ?
- Thread starter Rthur
- Start date
Re: 308 reamer ?
Speak to Dave Kiff over at PTG in Oregon ... he is excellent to speak with and am sure will help/set you up right.
Speak to Dave Kiff over at PTG in Oregon ... he is excellent to speak with and am sure will help/set you up right.
Re: 308 reamer ?
I cut .308 chambers with a .308 Obermeyer Match PTG reamer with good results.
The throat is a little short, which works great of you need to feed from a magazine.
I cut .308 chambers with a .308 Obermeyer Match PTG reamer with good results.
The throat is a little short, which works great of you need to feed from a magazine.
Re: 308 reamer ?
Thanks guys, I tried talking to Dave. They seem to be a little busy at the moment. I had found in some previous posts talk about the bisley reamer. I guess you could say I'm looking for the goto reamer for the factory ammo as my customers aren't into reloading yet.
thanks R
Thanks guys, I tried talking to Dave. They seem to be a little busy at the moment. I had found in some previous posts talk about the bisley reamer. I guess you could say I'm looking for the goto reamer for the factory ammo as my customers aren't into reloading yet.
thanks R
Re: 308 reamer ?
Rthur,
I got the 308 Bisley on advise from Dave at PTG. He also reccommended the sprial flute version. Thumbs up on both...I'd never used a spiral flute chamber reamer before. It cuts with so much less resistance it's hard to believe. The rifles shoot well also.
Rthur,
I got the 308 Bisley on advise from Dave at PTG. He also reccommended the sprial flute version. Thumbs up on both...I'd never used a spiral flute chamber reamer before. It cuts with so much less resistance it's hard to believe. The rifles shoot well also.
Re: 308 reamer ?
Rthur, I am never too busy for a question. Call me at 541-826-5808 or you can always get me on my cell . Its 541-660 5724. The custom shop email is [email protected] Thank you Dave
Rthur, I am never too busy for a question. Call me at 541-826-5808 or you can always get me on my cell . Its 541-660 5724. The custom shop email is [email protected] Thank you Dave
Re: 308 reamer ?
That's what I call customer service. Thanks Dave I'll give you a shout the first of the week.
thanks R
That's what I call customer service. Thanks Dave I'll give you a shout the first of the week.
thanks R
Re: 308 reamer ?
Talked to Dave today. A helluva nice guy. He set me up with the right reamer, we'll go from there.
R
Talked to Dave today. A helluva nice guy. He set me up with the right reamer, we'll go from there.
R
Re: 308 reamer ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kiff</div><div class="ubbcode-body">Rthur, I am never too busy for a question. Call me at 541-826-5808 or you can always get me on my cell . Its 541-660 5724. The custom shop email is [email protected] Thank you Dave</div></div>
This is not B.S...... he does talk and answer questions...I have alot of his reamers and other products...For this reason...
bill larson
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kiff</div><div class="ubbcode-body">Rthur, I am never too busy for a question. Call me at 541-826-5808 or you can always get me on my cell . Its 541-660 5724. The custom shop email is [email protected] Thank you Dave</div></div>
This is not B.S...... he does talk and answer questions...I have alot of his reamers and other products...For this reason...
bill larson
