D DrDeath Colonel Full Member Minuteman Dec 12, 2009 823 71 58 Sep 16, 2014 #1 Sep 16, 2014 #1 At 25 yards- where should your point of impact be if your dead on at 100yards. This for a 308-168g BTHP- Remington 700-26 inch barrel? I know 5.56 if you want a 100 yard zero it's 2-2/12 inches low at 25 yards.
At 25 yards- where should your point of impact be if your dead on at 100yards. This for a 308-168g BTHP- Remington 700-26 inch barrel? I know 5.56 if you want a 100 yard zero it's 2-2/12 inches low at 25 yards.
Dominick1441 Private Full Member Minuteman Nov 26, 2011 62 0 46 Texas Gulf Coast Sep 16, 2014 #2 Sep 16, 2014 #2 Mine is about a mil low Sent from my iPad using Tapatalk
NoLegs24 Wheels Full Member Minuteman Supporter Aug 15, 2013 2,220 4,385 San Diego, CA Sep 16, 2014 #3 Sep 16, 2014 #3 Im usually 2mils/7.2inches high @ 100yds when I get on paper @ 25yds
S SierraSR25 Sergeant of the Hide Full Member Minuteman Aug 10, 2014 131 8 Jacksonville, North Carolina Sep 17, 2014 #4 Sep 17, 2014 #4 .9 mils here
P Pinecone Gunny Sergeant Full Member Minuteman Feb 21, 2013 1,699 9 Sep 17, 2014 #5 Sep 17, 2014 #5 JBM Ballistics - JBM - Calculations - Trajectory But you need to know your muzzle velocity. Also scope height above bore changes the results. What exact 168 grain bullet is used. For the 168 gra Sierra Match King at 2700 fps (1.9 inch scope height) - 25 yards is 1.0" low for a 100 yard zero.
JBM Ballistics - JBM - Calculations - Trajectory But you need to know your muzzle velocity. Also scope height above bore changes the results. What exact 168 grain bullet is used. For the 168 gra Sierra Match King at 2700 fps (1.9 inch scope height) - 25 yards is 1.0" low for a 100 yard zero.