Rifle Scopes 35MM one piece mount with MOA cant built in?

[TX556DE]

Does anyone know of a good/proven 35MM mount that has some MOA cant built in? I have a 3-18X50 Valdada coming from Scott and would prefer a one piece mount rather than the rings. I come from the AR15 side of things and one piece mounts is all I know and want to stick with that if possible.

Thanks

Z

 

[koshkin]

Re: 35MM one piece mount with MOA cant built in?

What rifle is this going on?

ILya

 

[bward]

Re: 35MM one piece mount with MOA cant built in?

Desert Tactical Arms makes some nice mounts. I have one in 34mm with 40 MOA built in.

 

[BCP]

Re: 35MM one piece mount with MOA cant built in?

Larue has one with 10MOA cant built in. That should enough, any more and the 50MM objective might hit your rail.

 

[Adam B]

Re: 35MM one piece mount with MOA cant built in?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bward</div><div class="ubbcode-body">Desert Tactical Arms makes some nice mounts. I have one in 34mm with 40 MOA built in.</div></div>
+1000000

The DTA mount I owned was very well made!

 

[dpreston]

Re: 35MM one piece mount with MOA cant built in?

expensive stuff, but Near Manufacturing makes some good ones to whatever spec you want

 

[TX556DE]

Re: 35MM one piece mount with MOA cant built in?

Scope is going on a LMT MWS. Thanks for the replies guys, I will look into those.

Z

 

[BCP]

Re: 35MM one piece mount with MOA cant built in?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TX556DE</div><div class="ubbcode-body">Scope is going on a LMT MWS. Thanks for the replies guys, I will look into those.

Z </div></div>

Well, if you're buying that scope new it should come with rings (get the high ones). I have the 3-18x42 and from a 100 zero it has 10.1 mils of up so unless you're going to be shooting past 800 regularly & you hate holding over (holdovers with the IOR reticle is not hard btw although it is thick at max power) I don't know that you need a canted mount.

If you get it and still decide that you want a canted mount PM me, I'll buy the rings your scope came with (provided they are the high ones, I have lows and they aren't enough).

 

[TX556DE]

Re: 35MM one piece mount with MOA cant built in?

They did come with a set, Scott is sending me the highs. I do plan on taking it out to a 1K once the elusive 20" stainless barrel is available, til then the high rings will work. Thanks for your input.

Z

 

[Tucsondave]

Re: 35MM one piece mount with MOA cant built in?

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1958655

 

[Jon A]

Re: 35MM one piece mount with MOA cant built in?

Naturally, here's my favorite:

20 MOA built in. Solid as a rock. http://www.aadmount.com/ .

While I don't make a specific 35mm model at the moment, I can ream a 34mm model up to 35mm for you at no charge. Works just the same.

 

[david777]

Re: 35MM one piece mount with MOA cant built in?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jon A</div><div class="ubbcode-body">Naturally, here's my favorite:

20 MOA built in. Solid as a rock. http://www.aadmount.com/ .

While I don't make a specific 35mm model at the moment, I can ream a 34mm model up to 35mm for you at no charge. Works just the same. </div></div>


Jon A, will you be offering a lower height version suitable for bolt guns?

 

[Jon A]

Re: 35MM one piece mount with MOA cant built in?

That is something I've thought about and it is a possibility for the future as are several other new products. But I'm taking baby steps at the moment so it would be a ways in the future if I did.

 

[CSTactical]

Re: 35MM one piece mount with MOA cant built in?

Very nice looking mount John.

Mike @ CST

 

[david777]

Re: 35MM one piece mount with MOA cant built in?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jon A</div><div class="ubbcode-body">That is something I've thought about and it is a possibility for the future as are several other new products. But I'm taking baby steps at the moment so it would be a ways in the future if I did. </div></div>

Well if you do I would be in for 2 of them in 35mm. I have the same exact scope pictured and it needs a centerline of 1.1 to 1.2"

 

[PatrickChewing]

Re: 35MM one piece mount with MOA cant built in?

Jon
You got anything coming out for bolt guns?

 

[mumford]

Re: 35MM one piece mount with MOA cant built in?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Jon
You got anything coming out for bolt guns? </div></div>

There is a SB 34mm group buy and I am sure we need scope mounts.

 

[Jon A]

Re: 35MM one piece mount with MOA cant built in?

Thanks for the kind words guys, I do appreciate the enthusiasm. I'll have stuff for bolt guns eventually but this stuff doesn't happen overnight. For the meantime the solution to your S&B group buy problem is simple--you all need to put them on AR's, DTA's, etc!

 

[koshkin]

Re: 35MM one piece mount with MOA cant built in?

If you make a model for boltguns, count me in, Jon. I am quite impressed with the current mounts you are making, although there is one small addition to them that I would like to see (in the AR/DTA mount) in the future.

Maybe, I'll talk you into it over time.

ILya