Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I was able to get N570 and am running 129.3gr in my standard 375CT. Rumor has it more N570 will be available before the end of the year. I am running Bartlein 1-7 32in also.
I was able to get N570 and am running 129.3gr in my standard 375CT. Rumor has it more N570 will be available before the end of the year. I am running Bartlein 1-7 32in also.
For reference, I ran a 130gr load of returns under and cutting edge 377 for forming load. It ran 2980ish. I’m switching bullets now that all my brass is formed so that’s as good as I can get you for now
For reference, I ran a 130gr load of returns under and cutting edge 377 for forming load. It ran 2980ish. I’m switching bullets now that all my brass is formed so that’s as good as I can get you for now
You're absolutely correct sir! I was looking for any loads but I did order the cutting edge 350 Lasers to start with. I am currently fireforming with 130 gr of retumbo (very little left) and 350 sierra matchkings
You're absolutely correct sir! I was looking for any loads but I did order the cutting edge 350 Lasers to start with. I am currently fireforming with 130 gr of retumbo (very little left) and 350 sierra matchkings
What COL are you using for the 350gr matchkings? Any pressure at 130gr for your fireforming loads? I should be able to start putting together my fire forming loads here in a few weeks when I get unpacked and setup again. Sounds like Robert Vestal did about 6 of the BAS rifles all around the same time. My friend and I are 2 of them. Can't wait to get some trigger time on it!