I am getting some names together to see interest in having Bill R. at EDM Arms produce the 375 cheytac barrel. I know his son produces rounds for it also.
1. Me for Model 98
1. Me for Model 98
375 for your windrunner!
- Thread starter jkkfam89
- Start date
Re: 375 for your windrunner!
If you buy the reamers,barrel and gauges. Bill will do it,but I doubt he'll offer one as a option. For JGS reamers(?) and gauges it will cost you about 500. I think he's running rough reamers but I not sure.
If you buy the reamers,barrel and gauges. Bill will do it,but I doubt he'll offer one as a option. For JGS reamers(?) and gauges it will cost you about 500. I think he's running rough reamers but I not sure.
Re: 375 for your windrunner!
I am interested in one. Spoke to his office early this morning. They currently don't offer 375 CT barrel and bolt. If you want the barrel, you have to buy the reamer which will cost $800, in addition to the barrel and GO/NO-Go gauges. They do offer the 408 CT in barrel and bolt for 2K. Must send the receiver in. Takes about minimum of 6 weeks.
I am interested in one. Spoke to his office early this morning. They currently don't offer 375 CT barrel and bolt. If you want the barrel, you have to buy the reamer which will cost $800, in addition to the barrel and GO/NO-Go gauges. They do offer the 408 CT in barrel and bolt for 2K. Must send the receiver in. Takes about minimum of 6 weeks.
Re: 375 for your windrunner!
I may be interested also M96 here. Would obviously need bolt and barrel
I may be interested also M96 here. Would obviously need bolt and barrel
Re: 375 for your windrunner!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The Mechanic</div><div class="ubbcode-body">Maybe an allergy to anything that says CheyTac in the name? </div></div>
I know what you mean.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The Mechanic</div><div class="ubbcode-body">Maybe an allergy to anything that says CheyTac in the name? </div></div>
I know what you mean.
Re: 375 for your windrunner!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RollingThunder51</div><div class="ubbcode-body">.
At least Bill's stories are worth listening too...</div></div>
True he does have some good ones.
So RT51 how's he doing? I know it has been a rough move. Has he started to work out the bugs?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RollingThunder51</div><div class="ubbcode-body">.
At least Bill's stories are worth listening too...</div></div>
True he does have some good ones.
So RT51 how's he doing? I know it has been a rough move. Has he started to work out the bugs?
Re: 375 for your windrunner!
here is Bill's responce to an email I sent about 375 barrels
You & your interested friends can buy reammers & no go gauges and barrels. We will make them for you. You can buy the brass from Keary Ritchie 909-307-8877.
here is Bill's responce to an email I sent about 375 barrels
You & your interested friends can buy reammers & no go gauges and barrels. We will make them for you. You can buy the brass from Keary Ritchie 909-307-8877.
Re: 375 for your windrunner!
What option could there be on a barrel and bolt other than choice of brake or finish?
What option could there be on a barrel and bolt other than choice of brake or finish?
Re: 375 for your windrunner!
I've talked to randy dierks about doing putting a 375 barrel on my windrunner and he can. I have my 375 reamers + guages sitting there now. I have some 375 barrels in the safe but I think I'm just going to put them on my bat action. If you call bill he'll give you the contour drawing you'll need for the barrel maker. The barels are not going to be cheap as the breach end need to be larger than 1.75, I'd have to look at the drawing or measure it. For a example the last 375 barrel I bought from bartlein cost me 700+ because it had to be cut from 2+ inch stock.
I've talked to randy dierks about doing putting a 375 barrel on my windrunner and he can. I have my 375 reamers + guages sitting there now. I have some 375 barrels in the safe but I think I'm just going to put them on my bat action. If you call bill he'll give you the contour drawing you'll need for the barrel maker. The barels are not going to be cheap as the breach end need to be larger than 1.75, I'd have to look at the drawing or measure it. For a example the last 375 barrel I bought from bartlein cost me 700+ because it had to be cut from 2+ inch stock.
Re: 375 for your windrunner!
Are you talking about the 408 caliber? I asked his office and they told me that bolt and barrel are going to be 2K plus the reamer $800 plus go and no go gauge, however much that will be. I am thinking just to go with the 408 CT, unless there is another avenue to get the 375 CT barrel and bolt.
Are you talking about the 408 caliber? I asked his office and they told me that bolt and barrel are going to be 2K plus the reamer $800 plus go and no go gauge, however much that will be. I am thinking just to go with the 408 CT, unless there is another avenue to get the 375 CT barrel and bolt.
Re: 375 for your windrunner!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Are you talking about the 408 caliber? I asked his office and they told me that bolt and barrel are going to be 2K plus the reamer $800 plus go and no go gauge, however much that will be. I am thinking just to go with the 408 CT, unless there is another avenue to get the 375 CT barrel and bolt. </div></div>
Nope: we are speaking of the 375
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Are you talking about the 408 caliber? I asked his office and they told me that bolt and barrel are going to be 2K plus the reamer $800 plus go and no go gauge, however much that will be. I am thinking just to go with the 408 CT, unless there is another avenue to get the 375 CT barrel and bolt. </div></div>
Nope: we are speaking of the 375
Re: 375 for your windrunner!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jkkfam89</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Are you talking about the 408 caliber? I asked his office and they told me that bolt and barrel are going to be 2K plus the reamer $800 plus go and no go gauge, however much that will be. I am thinking just to go with the 408 CT, unless there is another avenue to get the 375 CT barrel and bolt. </div></div>
Nope: we are speaking of the 375 </div></div>
I definitely can live with a ready to go barrel and bolt in 375 CT for 2K.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jkkfam89</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Are you talking about the 408 caliber? I asked his office and they told me that bolt and barrel are going to be 2K plus the reamer $800 plus go and no go gauge, however much that will be. I am thinking just to go with the 408 CT, unless there is another avenue to get the 375 CT barrel and bolt. </div></div>
Nope: we are speaking of the 375 </div></div>
I definitely can live with a ready to go barrel and bolt in 375 CT for 2K.
Similar threads
